On Thu, Jul 1, 2021 at 5:41 PM Fabio Estevam <feste...@gmail.com> wrote: > > Hi Tim. > > On Thu, Jun 3, 2021 at 12:50 PM Tim Harvey <thar...@gateworks.com> wrote: > > > Marek, > > > > Is there something you want me to change here? > > > > I am happy to test gadget support as my board has an OTG connector. > > Could you give me some pointers on how to configure a gadget in U-Boot > > in order to test? > > One quick way to test gadget support is via the "ums 0 mmc 0" command. > > This will mount the eMMC content via USB mass storage device on the PC. > > You can check configs/warp7_defconfig for an example on how to select > the USB gadget options. > > I applied this one and tested on a imx7s-warp board via "ums 0 mmc 0". > > Tested-by: Fabio Estevam <feste...@gmail.com> > > I am interested in getting USB gadget support in imx8mm too. >
Fabio, Right - I finally remembered that earlier today and just sent a v2 of this series showing that I indeed tested that on both imx6q and imx8mm. When you get a chance please show your Tested-by on that thread. Tim
