Driver for the Freescale eSPI controller found in 85xx, P1/P2 and P4xx SoCs.
Signed-off-by: Can Aydin <can.ay...@locatacorp.com>
---
Changes for v2:
- Coding style cleanup
- Removed modifications to common code
Changes for v3:
- fixed whitespace between function calls and parameters
- replaced unneeded byte copy test function with memcpy
- removed dead code and C++ style comments
- separated board configuration patch from driver patch
drivers/spi/Makefile | 1 +
drivers/spi/fsl_espi.c | 240 ++++++++++++++++++++++++++++++++++++++++++++++++
include/fsl_espi.h | 50 ++++++++++
3 files changed, 291 insertions(+), 0 deletions(-)
create mode 100644 drivers/spi/fsl_espi.c
create mode 100644 include/fsl_espi.h
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index dfcbb8b..1aaa8e7 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o
COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o
COBJS-$(CONFIG_CF_SPI) += cf_spi.o
COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
+COBJS-$(CONFIG_FSL_ESPI) += fsl_espi.o
COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c
new file mode 100644
index 0000000..749d3f1
--- /dev/null
+++ b/drivers/spi/fsl_espi.c
@@ -0,0 +1,240 @@
+/*
+ * Freescale eSPI controller driver.
+ *
+ * Copyright 2010 Locata Corporation Pty. Ltd.
+ * Author: Can Aydin can.ay...@locatacorp.com
+ * Collab: Clayton Gumbrell clayton.gumbr...@locatacorp.com
+ *
+ * Adapted from Freescale ltib code by Mingkai Hu (mingkai...@freescale.com)
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <malloc.h>
+#include <spi.h>
+#include <fsl_espi.h>
+#include <asm/immap_85xx.h>
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ volatile ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR);
+ struct spi_slave *slave;
+ sys_info_t sysinfo;
+ unsigned long spibrg = 0;
+ unsigned char pm = 0;
+ int i;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ slave = malloc(sizeof(struct spi_slave));
+ if (!slave)
+ return NULL;
+
+ slave->bus = bus;
+ slave->cs = cs;
+
+ /* Enable eSPI interface */
+ espi->mode = ESPI_MODE_RXTHR(3) | ESPI_MODE_TXTHR(4) | ESPI_MODE_EN;
+
+ espi->event = 0xffffffff; /* Clear all eSPI events */
+ espi->mask = 0x00000000; /* Mask all eSPI interrupts */
+
+ /* Init CS mode interface */
+ for (i = 0; i < ESPI_MAX_CS_NUM; i++)
+ espi->csmode[i] = ESPI_CSMODE_INIT_VAL;
+
+ espi->csmode[cs] &=
+ ~(ESPI_CSMODE_PM(0xF) | ESPI_CSMODE_DIV16
+ | ESPI_CSMODE_CI_INACTIVEHIGH | ESPI_CSMODE_CP_BEGIN_EDGCLK
+ | ESPI_CSMODE_REV_MSB_FIRST | ESPI_CSMODE_LEN(ESPI_MAX_CHARSIZE));
+
+ /* Set eSPI BRG clock source */
+ get_sys_info(&sysinfo);
+ spibrg = sysinfo.freqSystemBus / 2;
+ if ((spibrg / max_hz) > 32) {
+ espi->csmode[cs] |= ESPI_CSMODE_DIV16;
+ pm = spibrg / (max_hz * 16 * 2);
+ if (pm > 16) {
+ pm = 16;
+ debug("Requested speed is too low: %d Hz"
+ " %u Hz is used.\n", max_hz,
+ (uint) (spibrg / (32 * 16)));
+ }
+ } else
+ pm = spibrg / (max_hz * 2);
+ if (pm)
+ pm--;
+ espi->csmode[cs] |= ESPI_CSMODE_PM(pm);
+
+ /* Set eSPI mode */
+ if (mode & SPI_CPHA)
+ espi->csmode[cs] |= ESPI_CSMODE_CP_BEGIN_EDGCLK;
+ if (mode & SPI_CPOL)
+ espi->csmode[cs] |= ESPI_CSMODE_CI_INACTIVEHIGH;
+
+ /* Character bit order: msb first */
+ espi->csmode[cs] |= ESPI_CSMODE_REV_MSB_FIRST;
+
+ /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */
+ espi->csmode[cs] |= ESPI_CSMODE_LEN(ESPI_CHARSIZE);
+
+ return slave;
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
+{
+ volatile ccsr_espi_t *espi = (void *)(CONFIG_SYS_MPC85xx_ESPI_ADDR);
+ u32 com;
+ u32 event;
+ u8 wordsize = 4; /* Fifo access registers are 32 bits */
+ u32 tmpdout, tmpdin;
+ unsigned int len, rxcount, txcount;
+
+ if (!(flags & (SPI_XFER_BEGIN | SPI_XFER_END))) {
+ debug("spi_xfer: Segmented transfers not supported.\n");
+ return 1;
+ }
+
+ if (!bitlen)
+ return 0;
+
+ len = bitlen / ESPI_CHARSIZE + ((bitlen % ESPI_CHARSIZE) ? 1 : 0);
+
+ if (len > ESPI_MAX_TRANLEN) {
+ debug("spi_xfer: oversize xfer(%u), max %u(0x%X)\n",
+ len, ESPI_MAX_TRANLEN, ESPI_MAX_TRANLEN);
+ return 1;
+ }
+
+ rxcount = len;
+ txcount = len;
+ debug("spi_xfer: slave %u:%u dout %08X(%08x) din %08X(%08x) len %u\n",
+ slave->bus, slave->cs,
+ *(uint *) dout, (uint) dout, *(uint *) din, (uint) din, len);
+
+ /* Prepare eSPI transfer to slave cs with length len */
+ com = 0;
+ com |= ESPI_COM_CS(slave->cs);
+ com |= ESPI_COM_TRANLEN(len);
+ espi->com = com;
+
+ /* Clear all eSPI events and initiate new command */
+ espi->event = 0xffffffff;
+ debugX(1, "spi_xfer: rxcount %08X, txcount %08X\n", rxcount, txcount);
+ while (rxcount) {
+
+ event = espi->event;
+ debugX(4, "spi_xfer: SPIE 0x%08x\n", event);
+ debugX(3, "spi_xfer: SPIE (TXCNT): %u\n",
+ ESPI_EV_GET_TXCNT(event));
+ if ((event & ESPI_EV_TNF) && (txcount)) {
+ /* Tx fifo not full and we still have stuff to send */
+ if ((txcount >= wordsize) &&
+ (ESPI_EV_GET_TXCNT(event) >= wordsize)) {
+ /* Have a full word and room to put it */
+ tmpdout = *(u32 *) dout;
+ txcount -= wordsize;
+ dout += wordsize;
+ espi->tx = tmpdout;
+ } else if (ESPI_EV_GET_TXCNT(event) >= txcount) {
+ /* Less than a word left and room to put it */
+ tmpdout = 0;
+ /* Avoid dout buffer read overflow */
+ memcpy(&tmpdout, dout, txcount);
+ espi->tx = tmpdout;
+ txcount = 0;
+ }
+ espi->event |= ESPI_EV_TNF;
+ debugX(2, "*** spi_xfer: ... %08x written\n", tmpdout);
+ debugX(3, "spi_xfer: rxcount %08X, txcount %08X\n",
+ rxcount, txcount);
+ }
+
+ event = espi->event;
+ debugX(4, "spi_xfer: SPIE 0x%08x\n", event);
+ debugX(3, "spi_xfer: SPIE (RXCNT): %u\n",
+ ESPI_EV_GET_RXCNT(event));
+ if (event & ESPI_EV_RNE) { /* Rx fifo has data */
+ unsigned int count = ESPI_EV_GET_RXCNT(event);
+ if (count >= wordsize) {
+ /* Have a full word to read */
+ tmpdin = espi->rx;
+ *(u32 *) din = tmpdin;
+ if ((rxcount -= wordsize) > 0) {
+ din += wordsize;
+ }
+ } else if (count >= rxcount) {
+ /* Less than a word left to read */
+ tmpdin = espi->rx;
+ /* Avoid din buffer write overflow */
+ memcpy(din, &tmpdin, rxcount);
+ rxcount = 0;
+ }
+ debugX(2, "*** spi_xfer: ... %08x read\n", tmpdin);
+ debugX(3, "spi_xfer: rxcount %08X, txcount %08X\n",
+ rxcount, txcount);
+ espi->event |= ESPI_EV_RNE;
+ }
+
+ }
+
+ /* clear the RXCNT and TXCNT */
+ espi->mode &= ~ESPI_MODE_EN;
+ espi->mode |= ESPI_MODE_EN;
+
+ return 0;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free((struct espi_slave *)slave);
+}
+
+void spi_init(void)
+{
+
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs < ESPI_MAX_CS_NUM;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+
+}
diff --git a/include/fsl_espi.h b/include/fsl_espi.h
new file mode 100644
index 0000000..a8d6035
--- /dev/null
+++ b/include/fsl_espi.h
@@ -0,0 +1,50 @@
+/*
+ * Include header for Freescale eSPI controller
+ *
+ * Copyright 2010 Locata Corporation Pty. Ltd.
+ * Can Aydin can.ay...@locatacorp.com
+ *
+ * Adapted from Freescale ltib code by Mingkai Hu (mingkai...@freescale.com)
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __FSL_ESPI_H__
+#define __FSL_ESPI_H__
+
+#define ESPI_MAX_CS_NUM 4
+
+#define ESPI_MAX_TRANLEN 0x10000
+#define ESPI_MAX_CHARSIZE 16
+
+/* TODO: Add support for character sizes other than 8-bits */
+#define ESPI_CHARSIZE 8
+
+#define ESPI_EV_TNF (1 << 8) /* Tx fifo not full */
+#define ESPI_EV_RNE (1 << 9) /* Rx fifo not empty */
+#define ESPI_EV_DONE (1 << 14) /* Transfer Complete */
+#define ESPI_EV_GET_TXCNT(spie) (((spie) >> 16) & 0x3F) /* Tx count */
+#define ESPI_EV_GET_RXCNT(spie) (((spie) >> 24) & 0x3F) /* Rx count */
+
+#define ESPI_MODE_EN (1 << 31) /* Enable interface */
+#define ESPI_MODE_TXTHR(x) ((x) << 8) /* Tx FIFO threshold */
+#define ESPI_MODE_RXTHR(x) ((x) << 0) /* Rx FIFO threshold */
+
+#define ESPI_COM_CS(x) ((x) << 30)
+#define ESPI_COM_TRANLEN(x) (((x)-1) << 0)
+
+#define ESPI_CSMODE_CI_INACTIVEHIGH (1 << 31)
+#define ESPI_CSMODE_CP_BEGIN_EDGCLK (1 << 30)
+#define ESPI_CSMODE_REV_MSB_FIRST (1 << 29)
+#define ESPI_CSMODE_DIV16 (1 << 28)
+#define ESPI_CSMODE_PM(x) ((x) << 24)
+#define ESPI_CSMODE_POL_ASSERTED_LOW (1 << 20)
+#define ESPI_CSMODE_LEN(x) (((x)-1) << 16)
+#define ESPI_CSMODE_CSBEF(x) ((x) << 12)
+#define ESPI_CSMODE_CSAFT(x) ((x) << 8)
+#define ESPI_CSMODE_CSCG(x) ((x) << 3)
+
+#define ESPI_CSMODE_INIT_VAL (ESPI_CSMODE_POL_ASSERTED_LOW | \
+ ESPI_CSMODE_CSBEF(0) | ESPI_CSMODE_CSAFT(0) | \
+ ESPI_CSMODE_CSCG(1))
+
+#endif /* __FSL_ESPI_H__ */
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
