Signed-off-by: Xiaobo Tian <peterwil...@gmail.com>
---
arch/arm/dts/rk3399-nanopi-r4s.dts | 40 +++++++++---------------------
1 file changed, 12 insertions(+), 28 deletions(-)
diff --git a/arch/arm/dts/rk3399-nanopi-r4s.dts
b/arch/arm/dts/rk3399-nanopi-r4s.dts
index 6f2cf17bf1..a85f4bf491 100644
--- a/arch/arm/dts/rk3399-nanopi-r4s.dts
+++ b/arch/arm/dts/rk3399-nanopi-r4s.dts
@@ -17,10 +17,6 @@
model = "FriendlyElec NanoPi R4S";
compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
- aliases {
- ethernet1 = &r8169;
- };
-
vdd_5v: vdd-5v {
compatible = "regulator-fixed";
regulator-name = "vdd_5v";
@@ -30,6 +26,10 @@
fan: pwm-fan {
compatible = "pwm-fan";
+ /*
+ * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
+ * work out to 0, ~1200, ~3000, and 5000RPM respectively.
+ */
cooling-levels = <0 12 18 255>;
#cooling-cells = <2>;
fan-supply = <&vdd_5v>;
@@ -73,40 +73,32 @@
status = "disabled";
};
+&i2c4 {
+ status = "disabled";
+};
+
&leds {
lan_led: led-1 {
gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
- label = "nanopi-r4s:green:lan";
+ label = "green:lan";
};
wan_led: led-2 {
gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
- label = "nanopi-r4s:green:wan";
+ label = "green:wan";
};
};
&leds_gpio {
rockchip,pins =
- <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>,
+ <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
&pcie0 {
max-link-speed = <1>;
num-lanes = <1>;
vpcie3v3-supply = <&vcc3v3_sys>;
-
- pcie@0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- r8169: pcie@0,0 {
- reg = <0x000000 0 0 0 0>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- };
- };
};
&sdhci {
@@ -117,10 +109,6 @@
status = "disabled";
};
-&sdmmc {
- host-index-min = <1>;
-};
-
&u2phy0_host {
phy-supply = <&vdd_5v>;
};
@@ -132,7 +120,3 @@
&usbdrd_dwc3_0 {
dr_mode = "host";
};
-
-&vcc3v3_sys {
- vin-supply = <&vcc5v0_sys>;
-};
--
2.32.0
