Hi Stephan
On 7/6/21 4:54 PM, Stephan Gerhold wrote:
> Simplify the code a bit by using the common mmc_of_parse() function
> instead of duplicating the device tree parsing code. We can still get
> a default value for cfg->f_max by assigning it before calling
> mmc_of_parse().
>
> Another advantage of this refactoring is that we parse more properties
> now, e.g. "non-removable" can be used to disable CD entirely.
>
> Signed-off-by: Stephan Gerhold <step...@gerhold.net>
> ---
>
> drivers/mmc/arm_pl180_mmci.c | 19 ++++---------------
> 1 file changed, 4 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c
> index e632eed03f..809b86570a 100644
> --- a/drivers/mmc/arm_pl180_mmci.c
> +++ b/drivers/mmc/arm_pl180_mmci.c
> @@ -424,7 +424,6 @@ static int arm_pl180_mmc_probe(struct udevice *dev)
> struct pl180_mmc_host *host = dev_get_priv(dev);
> struct mmc_config *cfg = &pdata->cfg;
> struct clk clk;
> - u32 bus_width;
> u32 periphid;
> int ret;
>
> @@ -457,24 +456,14 @@ static int arm_pl180_mmc_probe(struct udevice *dev)
> cfg->voltages = VOLTAGE_WINDOW_SD;
> cfg->host_caps = 0;
> cfg->f_min = host->clock_in / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
> - cfg->f_max = dev_read_u32_default(dev, "max-frequency", MMC_CLOCK_MAX);
> + cfg->f_max = MMC_CLOCK_MAX;
> cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
>
> gpio_request_by_name(dev, "cd-gpios", 0, &host->cd_gpio, GPIOD_IS_IN);
>
> - bus_width = dev_read_u32_default(dev, "bus-width", 1);
> - switch (bus_width) {
> - case 8:
> - cfg->host_caps |= MMC_MODE_8BIT;
> - /* Hosts capable of 8-bit transfers can also do 4 bits */
> - case 4:
> - cfg->host_caps |= MMC_MODE_4BIT;
> - break;
> - case 1:
> - break;
> - default:
> - dev_err(dev, "Invalid bus-width value %u\n", bus_width);
> - }
> + ret = mmc_of_parse(dev, cfg);
> + if (ret)
> + return ret;
>
> arm_pl180_mmc_init(host);
> mmc->priv = host;
>
Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
Tested-by: Patrice Chotard <patrice.chot...@foss.st.com> on stm32f769-disco
Thanks
Patrice
