On Tue, 2010-10-26 at 21:54 +0200, Wolfgang Denk wrote: > Dear Peter Tyser, > > In message <1285785448-4703-3-git-send-email-pty...@xes-inc.com> you wrote: > > Update to use the recent, common FSL PCI initialization code. > > > > Signed-off-by: Peter Tyser <pty...@xes-inc.com> > > CC: s...@denx.de > > --- > > board/tqc/tqm85xx/law.c | 4 +- > > board/tqc/tqm85xx/tlb.c | 10 ++-- > > board/tqc/tqm85xx/tqm85xx.c | 151 > > ++++++++++++------------------------------- > > include/configs/TQM85xx.h | 20 +++--- > > 4 files changed, 59 insertions(+), 126 deletions(-) > > This commit needs fixing. > > First, it corrupts the output. Some patch like this should be added: > > diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c > index 2c3885f..027c429 100644 > --- a/board/tqc/tqm85xx/tqm85xx.c > +++ b/board/tqc/tqm85xx/tqm85xx.c > @@ -567,7 +567,7 @@ void pci_init_board (void) > if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { > SET_STD_PCI_INFO(pci_info[num], 1); > pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs); > - printf ("\n PCI1: %d bit, %s MHz, %s, %s, %s\n", > + printf ("PCI1: %d bit, %s MHz, %s, %s, %s\n", > (pci_32) ? 32 : 64, > (pci_speed == 33333333) ? "33" : > (pci_speed == 66666666) ? "66" : "unknown", > @@ -591,7 +591,7 @@ void pci_init_board (void) > } > #endif > } else { > - printf(" PCI1: disabled\n"); > + printf("PCI1: disabled\n"); > } > #else > setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); > > > Even worse, we now see a (badly formatted, but this is just an added > "bonus") > > Scanning PCI bus 00 > PCIE1 on bus 00 - 00 > > which is completely bogus as there on these boards nor on these > processors. > > > Can you please provide a fix?
Can you send the entire bootup output? The code is based on Freescale reference boards, eg the mpc8568mds, so I'd guess the problem is not tqm85xx-specific. Best, Pete _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot