Increase MC firmware size from 1MB to 2MB in read commands in env. Signed-off-by: Priyanka Jain <priyanka.j...@nxp.com> --- include/configs/ls1088ardb.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 6f36dd417a..0df3b486e8 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -261,7 +261,7 @@ /* Initial environment variables */ #ifdef CONFIG_TFABOOT #define QSPI_MC_INIT_CMD \ - "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ + "sf probe 0:0;sf read 0x80000000 0xA00000 0x200000;" \ "sf read 0x80100000 0xE00000 0x100000;" \ "env exists secureboot && " \ "sf read 0x80640000 0x640000 0x40000 && " \ @@ -270,7 +270,7 @@ "esbc_validate 0x80680000 ;" \ "fsl_mc start mc 0x80000000 0x80100000\0" #define SD_MC_INIT_CMD \ - "mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ + "mmcinfo;mmc read 0x80000000 0x5000 0x1000;" \ "mmc read 0x80100000 0x7000 0x800;" \ "env exists secureboot && " \ "mmc read 0x80640000 0x3200 0x20 && " \ @@ -281,7 +281,7 @@ #else #if defined(CONFIG_QSPI_BOOT) #define MC_INIT_CMD \ - "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ + "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x200000;" \ "sf read 0x80100000 0xE00000 0x100000;" \ "env exists secureboot && " \ "sf read 0x80640000 0x640000 0x40000 && " \ @@ -292,7 +292,7 @@ "mcmemsize=0x70000000\0" #elif defined(CONFIG_SD_BOOT) #define MC_INIT_CMD \ - "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ + "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x1000;" \ "mmc read 0x80100000 0x7000 0x800;" \ "env exists secureboot && " \ "mmc read 0x80640000 0x3200 0x20 && " \ -- 2.17.1