- Enable DM SATA, removed IDE driver, and add SATA MV driver.
- Use ethernet PHY names from device tree in default boot command
Signed-off-by: Tony Dinh <mibo...@gmail.com>
---
include/configs/dreamplug.h | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
index 9106203ebc..65962ee733 100644
--- a/include/configs/dreamplug.h
+++ b/include/configs/dreamplug.h
@@ -31,8 +31,8 @@
/*
* Default environment variables
*/
-#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
- "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
+#define CONFIG_BOOTCOMMAND "setenv ethact
ethernet-controller@72000; " \
+ "${x_bootcmd_ethernet}; setenv ethact ethernet-controller@76000; " \
"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
"bootm 0x6400000;"
@@ -52,4 +52,12 @@
#define CONFIG_PHY_BASE_ADR 0
#endif /* CONFIG_CMD_NET */
+/*
+ * SATA Driver configuration
+ */
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
+#define CONFIG_LBA48
+#endif /* CONFIG_SATA */
+
#endif /* _CONFIG_DREAMPLUG_H */
--
2.20.1
