Reviewed-by: Jaehoon Chung <[email protected]> Sorry, Forgot to add Reviewed-by: https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
Thanks, Ashok > -----Original Message----- > From: Ashok Reddy Soma <[email protected]> > Sent: Tuesday, July 27, 2021 6:07 PM > To: [email protected] > Cc: [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; git <[email protected]>; > [email protected]; [email protected]; Ashok Reddy Soma > <[email protected]> > Subject: [PATCH v2 8/8] mmc: zynq_sdhci: Use set_control_reg from sdhci.c > > Since set_control_reg is available in sdhci.c, use it and remove > arasan_sdhci_set_control_reg(). > > Signed-off-by: Ashok Reddy Soma <[email protected]> > --- > > (no changes since v1) > > drivers/mmc/zynq_sdhci.c | 21 +-------------------- > 1 file changed, 1 insertion(+), 20 deletions(-) > > diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index > e71ba4eee0..4becd8c7ba 100644 > --- a/drivers/mmc/zynq_sdhci.c > +++ b/drivers/mmc/zynq_sdhci.c > @@ -603,29 +603,10 @@ static void arasan_dt_parse_clk_phases(struct > udevice *dev) > "clk-phase-mmc-hs400"); > } > > -static void arasan_sdhci_set_control_reg(struct sdhci_host *host) -{ > - struct mmc *mmc = (struct mmc *)host->mmc; > - u32 reg; > - > - if (!IS_SD(mmc)) > - return; > - > - if (mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) { > - reg = sdhci_readw(host, SDHCI_HOST_CONTROL2); > - reg |= SDHCI_CTRL_VDD_180; > - sdhci_writew(host, reg, SDHCI_HOST_CONTROL2); > - } > - > - if (mmc->selected_mode > SD_HS && > - mmc->selected_mode <= MMC_HS_200) > - sdhci_set_uhs_timing(host); > -} > - > static const struct sdhci_ops arasan_ops = { > .platform_execute_tuning = &arasan_sdhci_execute_tuning, > .set_delay = &arasan_sdhci_set_tapdelay, > - .set_control_reg = &arasan_sdhci_set_control_reg, > + .set_control_reg = &sdhci_set_control_reg, > }; > #endif > > -- > 2.17.1
