A U-Boot image could be loaded and executed at a different
location than it was linked at.
For example, Aspeed takes a stable release version of U-Boot image
as the golden one for recovery purposes. When the primary storage
such as flash is corrupted, the golden image could be loaded to any
SRAM/DRAM address on demands through ethernet/UART/etc.
To deal with this condition, the PIE is needed as there is only one
signed, golden image, which could be however executed at different
places.
This patch adds the PIE support for ARMv7 platform.
Signed-off-by: Chia-Wei Wang <chiawei_w...@aspeedtech.com>
---
arch/arm/Kconfig | 4 +++-
arch/arm/cpu/armv7/start.S | 43 ++++++++++++++++++++++++++++++++++++++
arch/arm/lib/crt0.S | 11 ++++++++++
arch/arm/lib/relocate.S | 35 ++++++++++++++++++++++---------
4 files changed, 82 insertions(+), 11 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2b7b625705..45879c9f06 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -9,7 +9,7 @@ config ARM64
select PHYS_64BIT
select SYS_CACHE_SHIFT_6
-if ARM64
+if ARM64 || CPU_V7A
config POSITION_INDEPENDENT
bool "Generate position-independent pre-relocation code"
help
@@ -19,7 +19,9 @@ config POSITION_INDEPENDENT
almost any 4K aligned address. This logic relies on the relocation
information that is embedded in the binary to support U-Boot
relocating itself to the top-of-RAM later during execution.
+endif
+if ARM64
config INIT_SP_RELATIVE
bool "Specify the early stack pointer relative to the .bss section"
default n if ARCH_QEMU
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index dcb4195d7b..3c0b2d6a71 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -39,6 +39,42 @@ reset:
/* Allow the board to save important registers */
b save_boot_params
save_boot_params_ret:
+#ifdef CONFIG_POSITION_INDEPENDENT
+ /*
+ * Fix .rela.dyn relocations. This allows U-Boot to loaded to and
+ * executed at a different address than it was linked at.
+ */
+pie_fixup:
+ adr r0, reset /* r0 <- Runtime value of reset label */
+ ldr r1, =reset /* r1 <- Linked value of reset label */
+ subs r4, r0, r1 /* r4 <- Runtime-vs-link offset */
+ beq pie_fixup_done
+
+ adr r0, pie_fixup
+ ldr r1, _rel_dyn_start_ofs
+ add r2, r0, r1 /* r2 <- Runtime &__rel_dyn_start */
+ ldr r1, _rel_dyn_end_ofs
+ add r3, r0, r1 /* r3 <- Runtime &__rel_dyn_end */
+
+pie_fix_loop:
+ ldr r0, [r2] /* r0 <- Link location */
+ ldr r1, [r2, #4] /* r1 <- fixup */
+ cmp r1, #23 /* relative fixup? */
+ bne pie_skip_reloc
+
+ /* relative fix: increase location by offset */
+ add r0, r4
+ ldr r1, [r0]
+ add r1, r4
+ str r1, [r0]
+ str r0, [r2]
+ add r2, #8
+pie_skip_reloc:
+ cmp r2, r3
+ blo pie_fix_loop
+pie_fixup_done:
+#endif
+
#ifdef CONFIG_ARMV7_LPAE
/*
* check for Hypervisor support
@@ -340,3 +376,10 @@ ENTRY(cpu_init_crit)
b lowlevel_init @ go setup pll,mux,memory
ENDPROC(cpu_init_crit)
#endif
+
+#if CONFIG_POSITION_INDEPENDENT
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - pie_fixup
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - pie_fixup
+#endif
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
index 46b6be21a8..956d258c9d 100644
--- a/arch/arm/lib/crt0.S
+++ b/arch/arm/lib/crt0.S
@@ -130,6 +130,14 @@ ENTRY(_main)
ldr r9, [r9, #GD_NEW_GD] /* r9 <- gd->new_gd */
adr lr, here
+#if defined(CONFIG_POSITION_INDEPENDENT)
+ adr r0, _main
+ ldr r1, _start_ofs
+ add r0, r1
+ ldr r1, =CONFIG_SYS_TEXT_BASE
+ sub r1, r0
+ add lr, r1
+#endif
ldr r0, [r9, #GD_RELOC_OFF] /* r0 = gd->reloc_off */
add lr, lr, r0
#if defined(CONFIG_CPU_V7M)
@@ -180,3 +188,6 @@ here:
#endif
ENDPROC(_main)
+
+_start_ofs:
+ .word _start - _main
diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S
index e5f7267be1..14b7f61c1a 100644
--- a/arch/arm/lib/relocate.S
+++ b/arch/arm/lib/relocate.S
@@ -78,22 +78,28 @@ ENDPROC(relocate_vectors)
*/
ENTRY(relocate_code)
- ldr r1, =__image_copy_start /* r1 <- SRC &__image_copy_start */
- subs r4, r0, r1 /* r4 <- relocation offset */
- beq relocate_done /* skip relocation */
- ldr r2, =__image_copy_end /* r2 <- SRC &__image_copy_end */
-
+ adr r3, relocate_code
+ ldr r1, _image_copy_start_ofs
+ add r1, r3 /* r1 <- Run &__image_copy_start */
+ subs r4, r0, r1 /* r4 <- Run to copy offset */
+ beq relocate_done /* skip relocation */
+ ldr r1, _image_copy_start_ofs
+ add r1, r3 /* r1 <- Run &__image_copy_start */
+ ldr r2, _image_copy_end_ofs
+ add r2, r3 /* r2 <- Run &__image_copy_end */
copy_loop:
- ldmia r1!, {r10-r11} /* copy from source address [r1] */
- stmia r0!, {r10-r11} /* copy to target address [r0] */
- cmp r1, r2 /* until source end address [r2] */
+ ldmia r1!, {r10-r11} /* copy from source address [r1] */
+ stmia r0!, {r10-r11} /* copy to target address [r0] */
+ cmp r1, r2 /* until source end address [r2] */
blo copy_loop
/*
* fix .rel.dyn relocations
*/
- ldr r2, =__rel_dyn_start /* r2 <- SRC &__rel_dyn_start */
- ldr r3, =__rel_dyn_end /* r3 <- SRC &__rel_dyn_end */
+ ldr r1, _rel_dyn_start_ofs
+ add r2, r1, r3 /* r2 <- Run &__rel_dyn_start */
+ ldr r1, _rel_dyn_end_ofs
+ add r3, r1, r3 /* r3 <- Run &__rel_dyn_end */
fixloop:
ldmia r2!, {r0-r1} /* (r0,r1) <- (SRC location,fixup) */
and r1, r1, #0xff
@@ -129,3 +135,12 @@ relocate_done:
#endif
ENDPROC(relocate_code)
+
+_image_copy_start_ofs:
+ .word __image_copy_start - relocate_code
+_image_copy_end_ofs:
+ .word __image_copy_end - relocate_code
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - relocate_code
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - relocate_code
--
2.17.1
