On 02.08.21 17:47, Tom Rini wrote: > On Mon, Aug 02, 2021 at 05:21:13PM +0200, Jan Kiszka wrote: > >> From: Jan Kiszka <jan.kis...@siemens.com> >> >> This adds support for the IOT2050 Basic and Advanced devices. The Basic >> used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS >> quad-core version. >> >> Both variants are booted via a Siemens-provided FSBL that runs on the R5 >> cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot >> SPL, ATF and TEE have to reside in SPI flash. >> >> Full integration into a bootable image can be found on >> https://github.com/siemens/meta-iot2050 >> >> Based on original board support by Le Jin, Gao Nian and Chao Zeng. >> >> Signed-off-by: Jan Kiszka <jan.kis...@siemens.com> >> --- >> arch/arm/mach-k3/Kconfig | 1 + >> board/siemens/iot2050/Kconfig | 32 ++++ >> board/siemens/iot2050/MAINTAINERS | 8 + >> board/siemens/iot2050/Makefile | 10 ++ >> board/siemens/iot2050/README | 65 +++++++ > > This needs to be an rST and under doc/board/ now. >
Okay. Anything else before rolling out v6? > [snip] >> diff --git a/board/siemens/iot2050/config.mk >> b/board/siemens/iot2050/config.mk >> new file mode 100644 >> index 0000000000..267ec76c4e >> --- /dev/null >> +++ b/board/siemens/iot2050/config.mk >> @@ -0,0 +1,8 @@ >> +# SPDX-License-Identifier: GPL-2.0+ >> +# >> +# Copyright (c) Siemens AG, 2020-2021 >> +# >> +# Authors: >> +# Jan Kiszka <jan.kis...@siemens.com> >> + >> +flash.bin: all > > Do we need this file? Thanks! > Yes, this ensured building the required flash.bin image by default. Other artifacts are not useful on the board. Jan -- Siemens AG, T RDA IOT Corporate Competence Center Embedded Linux