On 03.08.21 15:27, Tom Rini wrote: > On Tue, Aug 03, 2021 at 11:26:55AM +0200, Jan Kiszka wrote: > >> From: Jan Kiszka <jan.kis...@siemens.com> >> >> This adds support for the IOT2050 Basic and Advanced devices. The Basic >> used the dual-core AM6528 GP processor, the Advanced one the AM6548 HS >> quad-core version. >> >> Both variants are booted via a Siemens-provided FSBL that runs on the R5 >> cores. Consequently, U-Boot support is targeting the A53 cores. U-Boot >> SPL, ATF and TEE have to reside in SPI flash. >> >> Full integration into a bootable image can be found on >> https://github.com/siemens/meta-iot2050 >> >> Based on original board support by Le Jin, Gao Nian and Chao Zeng. >> >> Signed-off-by: Jan Kiszka <jan.kis...@siemens.com> >> --- >> arch/arm/mach-k3/Kconfig | 1 + >> board/siemens/iot2050/Kconfig | 32 ++++ >> board/siemens/iot2050/MAINTAINERS | 9 + >> board/siemens/iot2050/Makefile | 10 ++ >> board/siemens/iot2050/board.c | 284 ++++++++++++++++++++++++++++++ >> board/siemens/iot2050/config.mk | 8 + >> configs/iot2050_defconfig | 132 ++++++++++++++ >> doc/board/siemens/iot2050.rst | 76 ++++++++ > > I'm still getting the hang of the rST stuff myself and I was too literal > in my request, sorry. You need to add an index file (see 5e1df33b6821 > for a recent example) and also update doc/board/index.rst to include > your index. >
OK, will have a look. How to ensure it's compiled / included properly? "make htmldocs" eg. should be enough? Jan -- Siemens AG, T RDA IOT Corporate Competence Center Embedded Linux