Add support for enumerating MMC card in a given mode using mmc rescan and
mmc dev commands. The speed mode is provided as the last argument in these
commands and is indicated using the index from enum bus_mode in
include/mmc.h. A speed mode can be set only if it has already been enabled
in the device tree.
Signed-off-by: Aswath Govindraju <a-govindr...@ti.com>
---
Changes since v2:
- made init_mmc_device as wrapper function around __init_mmc_device
- rebased on top of latest master
- used dectoul() instead of simple_strtoul() whereever possible
Changes since v1:
- Removed #ifdef around the definition of user_speed_mode field
- Replaced #if with if (IS_ENABLED())
- Removed repeated MMC_CAP(MMC_LEGACY)
- initialized user_speed_mode to MMC_MODES_SPEED in mmc_init_device
and mmc_dp_preinit
- corrected curr_device to dev and included part check, the case when
mode is provided in the argument
cmd/Kconfig | 10 ++++++++
cmd/mmc.c | 52 +++++++++++++++++++++++++++++++++-------
doc/usage/mmc.rst | 49 +++++++++++++++++++++++++++++++++++--
drivers/mmc/mmc-uclass.c | 5 +++-
drivers/mmc/mmc.c | 22 ++++++++++++++++-
include/mmc.h | 2 ++
6 files changed, 128 insertions(+), 12 deletions(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index ffef3cc76ca4..3a857b3f6e2e 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -2389,4 +2389,14 @@ config CMD_UBIFS
help
UBIFS is a file system for flash devices which works on top of UBI.
+config MMC_SPEED_MODE_SET
+ bool "set speed mode using mmc command"
+ depends on CMD_MMC
+ default n
+ help
+ Enable setting speed mode using mmc rescan and mmc dev commands.
+ The speed mode is provided as the last argument in these commands
+ and is indicated using the index from enum bus_mode in
+ include/mmc.h. A speed mode can be set only if it has already
+ been enabled in the device tree.
endmenu
diff --git a/cmd/mmc.c b/cmd/mmc.c
index c67ad7624227..f1e30d0cf64b 100644
--- a/cmd/mmc.c
+++ b/cmd/mmc.c
@@ -120,7 +120,9 @@ static void print_mmcinfo(struct mmc *mmc)
}
}
}
-static struct mmc *init_mmc_device(int dev, bool force_init)
+
+static struct mmc *__init_mmc_device(int dev, bool force_init,
+ enum bus_mode speed_mode)
{
struct mmc *mmc;
mmc = find_mmc_device(dev);
@@ -134,6 +136,10 @@ static struct mmc *init_mmc_device(int dev, bool
force_init)
if (force_init)
mmc->has_init = 0;
+
+ if (IS_ENABLED(CONFIG_MMC_SPEED_MODE_SET))
+ mmc->user_speed_mode = speed_mode;
+
if (mmc_init(mmc))
return NULL;
@@ -145,6 +151,11 @@ static struct mmc *init_mmc_device(int dev, bool
force_init)
return mmc;
}
+static struct mmc *init_mmc_device(int dev, bool force_init)
+{
+ return __init_mmc_device(dev, force_init, MMC_MODES_END);
+}
+
static int do_mmcinfo(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
@@ -482,8 +493,17 @@ static int do_mmc_rescan(struct cmd_tbl *cmdtp, int flag,
int argc, char *const argv[])
{
struct mmc *mmc;
+ enum bus_mode speed_mode = MMC_MODES_END;
+
+ if (argc == 1) {
+ mmc = init_mmc_device(curr_device, true);
+ } else if (argc == 2) {
+ speed_mode = (int)dectoul(argv[1], NULL);
+ mmc = __init_mmc_device(curr_device, true, speed_mode);
+ } else {
+ return CMD_RET_USAGE;
+ }
- mmc = init_mmc_device(curr_device, true);
if (!mmc)
return CMD_RET_FAILURE;
@@ -515,11 +535,14 @@ static int do_mmc_dev(struct cmd_tbl *cmdtp, int flag,
{
int dev, part = 0, ret;
struct mmc *mmc;
+ enum bus_mode speed_mode = MMC_MODES_END;
if (argc == 1) {
dev = curr_device;
+ mmc = init_mmc_device(dev, true);
} else if (argc == 2) {
- dev = dectoul(argv[1], NULL);
+ dev = (int)dectoul(argv[1], NULL);
+ mmc = init_mmc_device(dev, true);
} else if (argc == 3) {
dev = (int)dectoul(argv[1], NULL);
part = (int)dectoul(argv[2], NULL);
@@ -528,11 +551,21 @@ static int do_mmc_dev(struct cmd_tbl *cmdtp, int flag,
PART_ACCESS_MASK);
return CMD_RET_FAILURE;
}
+ mmc = init_mmc_device(dev, true);
+ } else if (argc == 4) {
+ dev = (int)dectoul(argv[1], NULL);
+ part = (int)dectoul(argv[2], NULL);
+ if (part > PART_ACCESS_MASK) {
+ printf("#part_num shouldn't be larger than %d\n",
+ PART_ACCESS_MASK);
+ return CMD_RET_FAILURE;
+ }
+ speed_mode = (int)dectoul(argv[3], NULL);
+ mmc = __init_mmc_device(dev, true, speed_mode);
} else {
return CMD_RET_USAGE;
}
- mmc = init_mmc_device(dev, true);
if (!mmc)
return CMD_RET_FAILURE;
@@ -983,9 +1016,9 @@ static struct cmd_tbl cmd_mmc[] = {
#if CONFIG_IS_ENABLED(CMD_MMC_SWRITE)
U_BOOT_CMD_MKENT(swrite, 3, 0, do_mmc_sparse_write, "", ""),
#endif
- U_BOOT_CMD_MKENT(rescan, 1, 1, do_mmc_rescan, "", ""),
+ U_BOOT_CMD_MKENT(rescan, 2, 1, do_mmc_rescan, "", ""),
U_BOOT_CMD_MKENT(part, 1, 1, do_mmc_part, "", ""),
- U_BOOT_CMD_MKENT(dev, 3, 0, do_mmc_dev, "", ""),
+ U_BOOT_CMD_MKENT(dev, 4, 0, do_mmc_dev, "", ""),
U_BOOT_CMD_MKENT(list, 1, 1, do_mmc_list, "", ""),
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
U_BOOT_CMD_MKENT(hwpartition, 28, 0, do_mmc_hwpartition, "", ""),
@@ -1042,9 +1075,12 @@ U_BOOT_CMD(
"mmc swrite addr blk#\n"
#endif
"mmc erase blk# cnt\n"
- "mmc rescan\n"
+ "mmc rescan [mode]\n"
"mmc part - lists available partition on current mmc device\n"
- "mmc dev [dev] [part] - show or set current mmc device [partition]\n"
+ "mmc dev [dev] [part] [mode] - show or set current mmc device
[partition] and set mode\n"
+ " - the required speed mode is passed as the index from the following
list\n"
+ " [MMC_LEGACY, MMC_HS, SD_HS, MMC_HS_52, MMC_DDR_52, UHS_SDR12,
UHS_SDR25,\n"
+ " UHS_SDR50, UHS_DDR50, UHS_SDR104, MMC_HS_200, MMC_HS_400,
MMC_HS_400_ES]\n"
"mmc list - lists available devices\n"
"mmc wp - power on write protect boot partitions\n"
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
diff --git a/doc/usage/mmc.rst b/doc/usage/mmc.rst
index f20efe3d7063..d15b151884fd 100644
--- a/doc/usage/mmc.rst
+++ b/doc/usage/mmc.rst
@@ -12,9 +12,9 @@ Synopsis
mmc read addr blk# cnt
mmc write addr blk# cnt
mmc erase blk# cnt
- mmc rescan
+ mmc rescan [mode]
mmc part
- mmc dev [dev] [part]
+ mmc dev [dev] [part] [mode]
mmc list
mmc wp
mmc bootbus <dev> <boot_bus_width> <reset_boot_bus_width> <boot_mode>
@@ -49,6 +49,27 @@ The 'mmc erase' command erases *cnt* blocks on the MMC
device starting at block
The 'mmc rescan' command scans the available MMC device.
+ mode
+ speed mode to set.
+ CONFIG_MMC_SPEED_MODE_SET should be enabled. The required speed mode is
+ passed as the index from the following list.
+
+ 0 - MMC_LEGACY
+ 1 - MMC_HS
+ 2 - SD_HS
+ 3 - MMC_HS_52
+ 4 - MMC_DDR_52
+ 5 - UHS_SDR12
+ 6 - UHS_SDR25
+ 7 - UHS_SDR50
+ 8 - UHS_DDR50
+ 9 - UHS_SDR104
+ 10 - MMC_HS_200
+ 11 - MMC_HS_400
+ 12 - MMC_HS_400_ES
+
+ A speed mode can be set only if it has already been enabled in the
device tree
+
The 'mmc part' command displays the list available partition on current mmc
device.
The 'mmc dev' command shows or set current mmc device.
@@ -58,6 +79,27 @@ The 'mmc dev' command shows or set current mmc device.
part
partition number to change
+ mode
+ speed mode to set.
+ CONFIG_MMC_SPEED_MODE_SET should be enabled. The required speed mode is
+ passed as the index from the following list.
+
+ 0 - MMC_LEGACY
+ 1 - MMC_HS
+ 2 - SD_HS
+ 3 - MMC_HS_52
+ 4 - MMC_DDR_52
+ 5 - UHS_SDR12
+ 6 - UHS_SDR25
+ 7 - UHS_SDR50
+ 8 - UHS_DDR50
+ 9 - UHS_SDR104
+ 10 - MMC_HS_200
+ 11 - MMC_HS_400
+ 12 - MMC_HS_400_ES
+
+ A speed mode can be set only if it has already been enabled in the
device tree
+
The 'mmc list' command displays the list available devices.
The 'mmc wp' command enables "power on write protect" function for boot
partitions.
@@ -194,6 +236,9 @@ The current device can be shown or set via 'mmc dev'
command:
=> mmc dev 2 0
switch to partitions #0, OK
mmc2 is current device
+ => mmc dev 0 1 4
+ switch to partitions #1, OK
+ mmc0(part 1) is current device
The list of available devices can be shown via 'mmc list' command:
::
diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
index 0e13238c7e7a..3ee92d03ca23 100644
--- a/drivers/mmc/mmc-uclass.c
+++ b/drivers/mmc/mmc-uclass.c
@@ -342,6 +342,9 @@ void mmc_do_preinit(void)
if (!m)
continue;
+
+ m->user_speed_mode = MMC_MODES_END; /* Initialising user set
speed mode */
+
if (m->preinit)
mmc_start_init(m);
}
@@ -414,7 +417,7 @@ int mmc_bind(struct udevice *dev, struct mmc *mmc, const
struct mmc_config *cfg)
/* setup initial part type */
bdesc->part_type = cfg->part_type;
mmc->dev = dev;
-
+ mmc->user_speed_mode = MMC_MODES_END;
return 0;
}
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 8078a89f18cb..bd348974ae7d 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -2862,7 +2862,25 @@ int mmc_start_init(struct mmc *mmc)
* timings.
*/
mmc->host_caps = mmc->cfg->host_caps | MMC_CAP(MMC_LEGACY) |
- MMC_CAP(MMC_LEGACY) | MMC_MODE_1BIT;
+ MMC_MODE_1BIT;
+
+ if (IS_ENABLED(CONFIG_MMC_SPEED_MODE_SET)) {
+ if (mmc->user_speed_mode != MMC_MODES_END) {
+ int i;
+ /* set host caps */
+ if (mmc->host_caps & MMC_CAP(mmc->user_speed_mode)) {
+ /* Remove all existing speed capabilities */
+ for (i = MMC_LEGACY; i < MMC_MODES_END; i++)
+ mmc->host_caps &= ~MMC_CAP(i);
+ mmc->host_caps |= (MMC_CAP(mmc->user_speed_mode)
+ | MMC_CAP(MMC_LEGACY) |
+ MMC_MODE_1BIT);
+ } else {
+ pr_err("bus_mode requested is not supported\n");
+ return -EINVAL;
+ }
+ }
+ }
#if CONFIG_IS_ENABLED(DM_MMC)
mmc_deferred_probe(mmc);
#endif
@@ -3060,6 +3078,8 @@ int mmc_init_device(int num)
}
m = mmc_get_mmc_dev(dev);
+ m->user_speed_mode = MMC_MODES_END; /* Initialising user set speed mode
*/
+
if (!m)
return 0;
if (m->preinit)
diff --git a/include/mmc.h b/include/mmc.h
index 0bf19de20e52..b92e25534021 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -726,6 +726,8 @@ struct mmc {
*/
u32 quirks;
u8 hs400_tuning;
+
+ enum bus_mode user_speed_mode; /* input speed mode from user */
};
#if CONFIG_IS_ENABLED(DM_MMC)
--
2.17.1
