Am 29.10.2010 16:44, schrieb Wolfgang Denk: > Dear Alexander Holler, > > In message<4ccadc10.9010...@ahsoftware.de> you wrote: >> > ... >> U-Boot code: 00700000 -> 0075A210 BSS: -> 007A0300 >> SoC: Kirkwood 88F6281_A0 >> monitor len: 000A0300 >> ramsize: 08000000 > > That's 128 MB... > >> TLB table at: 07ff0000 >> Top of RAM usable for U-Boot at: 07ff0000 >> Reserving 640k for U-Boot at: 07f4f000 >> Reserving 1152k for malloc() at: 07e2f000 >> Reserving 48 Bytes for Board Info at: 07e2efd0 >> Reserving 92 Bytes for Global Data at: 07e2ef74 >> New Stack Pointer is: 07e2ef70 >> RAM Configuration: >> Bank #0: 00000000 128 MiB >> Bank #1: 00000000 0 Bytes > > These look OK. > >> Bank #2: e7dfe27e 4 GiB >> Bank #3: 7fdbe1ce 2.7 GiB > > But this is obviously garbage. And the printed sizes are garbage, > too. > > Where is this coming from?
I have forgotten to change *NR_BANKS from 4 to 1 for these tests, but I assume this is already fixed here without the need to change *NR_BANKS: http://lists.denx.de/pipermail/u-boot/2010-October/080621.html Regards, Alexander _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot