I'm fine with someone else taking this tegra patch in if it's part of a larger series. If not, let me know and I'll take it as a singleton.
Tom -- nvpublic -----Original Message----- From: Stefano Babic <sba...@denx.de> Sent: Wednesday, August 11, 2021 6:24 AM To: Marcel Ziswiler <mar...@ziswiler.com>; u-boot@lists.denx.de Cc: Stefano Babic <sba...@denx.de>; Simon Glass <s...@chromium.org>; Marcel Ziswiler <marcel.ziswi...@toradex.com>; Oleksandr Suvorov <oleksandr.suvo...@toradex.com>; Tom Warren <twar...@nvidia.com> Subject: Re: [PATCH v3] board: apalis-tk1: launch toradex easy installer in usb recovery External email: Use caution opening links or attachments Hallo Marcel, On 11.08.21 15:12, Marcel Ziswiler wrote: > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > The USB recovery mode is used by Toradex to load the Toradex Easy > Installer image which supports further system images installation. > Prepare for loading and launching the Toradex Easy Installer if the > USB Recovery mode is activated. > > Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> > Signed-off-by: Oleksandr Suvorov <oleksandr.suvo...@toradex.com> > > --- > Added Tom in CC as he's in charge for Tegra (I have just reviewed V2 because it was part of i.MX series). Best regards, Stefano > Changes in v3: > - Switch very long lines to multiline to make checkpatch happy as > suggested by Stefano. > > board/toradex/apalis-tk1/apalis-tk1.c | 20 ++++++++++++++++++-- > 1 file changed, 18 insertions(+), 2 deletions(-) > > diff --git a/board/toradex/apalis-tk1/apalis-tk1.c > b/board/toradex/apalis-tk1/apalis-tk1.c > index b97617cfca3..2769b546010 100644 > --- a/board/toradex/apalis-tk1/apalis-tk1.c > +++ b/board/toradex/apalis-tk1/apalis-tk1.c > @@ -38,8 +38,24 @@ > int arch_misc_init(void) > { > if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) == > - NVBOOTTYPE_RECOVERY) > - printf("USB recovery mode\n"); > + NVBOOTTYPE_RECOVERY) { > + printf("USB recovery mode, attempting to boot Toradex Easy " > + "Installer\n"); > + env_set("bootdelay", "-2"); > + env_set("defargs", "pcie_aspm=off user_debug=30"); > + env_set("fdt_high", ""); > + env_set("initrd_high", ""); > + > + env_set("setup", "env set setupargs igb_mac=${ethaddr} " > + "consoleblank=0 no_console_suspend=1 " > + "console=${console},${baudrate}n8 ${memargs}"); > + env_set("teziargs", "rootfstype=squashfs root=/dev/ram quiet " > + "autoinstall"); > + env_set("vidargs", "video=HDMI-A-1:640x480-16@60D"); > + env_set("bootcmd", "run setup; env set bootargs ${defargs} " > + "${setupargs} ${vidargs} ${teziargs}; bootm 0x80208000" > + "#config@${soc}-${fdt_module}-${fdt_board}.dtb"); > + } > > /* PCB Version Indication: V1.2 and later have GPIO_PV0 wired to GND */ > gpio_request(TEGRA_GPIO(V, 0), "PCB Version Indication"); > -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================