On 8/7/21 10:24 PM, Simon Glass wrote: > Use the livetree API for this driver. > > Signed-off-by: Simon Glass <s...@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com> Best Regars, Jaehoon Chung > --- > > drivers/mmc/ftsdc010_mci.c | 22 +++++++--------------- > 1 file changed, 7 insertions(+), 15 deletions(-) > > diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c > index 221fba313d3..b30da5b72a4 100644 > --- a/drivers/mmc/ftsdc010_mci.c > +++ b/drivers/mmc/ftsdc010_mci.c > @@ -30,8 +30,6 @@ > #include <syscon.h> > #include <linux/err.h> > > -DECLARE_GLOBAL_DATA_PTR; > - > #define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 4) /* 250 ms */ > #define CFG_RST_TIMEOUT CONFIG_SYS_HZ /* 1 sec reset timeout */ > > @@ -395,24 +393,18 @@ static int ftsdc010_mmc_of_to_plat(struct udevice *dev) > #if CONFIG_IS_ENABLED(OF_REAL) > struct ftsdc_priv *priv = dev_get_priv(dev); > struct ftsdc010_chip *chip = &priv->chip; > + > chip->name = dev->name; > chip->ioaddr = dev_read_addr_ptr(dev); > - chip->buswidth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), > - "bus-width", 4); > + chip->buswidth = dev_read_u32_default(dev, "bus-width", 4); > chip->priv = dev; > - priv->fifo_depth = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), > - "fifo-depth", 0); > - priv->fifo_mode = fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev), > - "fifo-mode"); > - if (fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev), > - "clock-freq-min-max", priv->minmax, 2)) { > - int val = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), > - "max-frequency", -EINVAL); > - if (val < 0) > - return val; > + priv->fifo_depth = dev_read_u32_default(dev, "fifo-depth", 0); > + priv->fifo_mode = dev_read_bool(dev, "fifo-mode"); > + if (dev_read_u32_array(dev, "clock-freq-min-max", priv->minmax, 2)) { > + if (dev_read_u32(dev, "max-frequency", &priv->minmax[1])) > + return -EINVAL; > > priv->minmax[0] = 400000; /* 400 kHz */ > - priv->minmax[1] = val; > } else { > debug("%s: 'clock-freq-min-max' property was deprecated.\n", > __func__); >