On Sun, Aug 15, 2021 at 01:48:26PM +0200, Pali Rohár wrote: > On Monday 02 August 2021 21:40:07 Tom Rini wrote: > > OK, thanks. Then the right fix is to introduce whatever SPL_xxx symbols > > you need so that you can turn off what you don't want in SPL but leave > > it enabled in full U-Boot, and update the code to use > > CONFIG_IS_ENABLED(xxx). If you can do that part, I can iterate over > > converting everyone else that assumes what we have today is what it > > wants in SPL and non-SPL. > > Hello Tom! Below is patch which adds SPL_AHCI_PCI symbol. I'm not sure > if this is correct approach but it looks like that it fixed that issue. > With this patch I can compile U-Boot with and also without enabling of > CONFIG_SPL_SATA_SUPPORT option. > > > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig > index 0c1490a9f900..96c7c30375bd 100644 > --- a/drivers/ata/Kconfig > +++ b/drivers/ata/Kconfig > @@ -41,6 +41,12 @@ config AHCI_PCI > help > Enables support for the PCI-based AHCI controller. > > +config SPL_AHCI_PCI > + bool "Support for PCI-based AHCI controller for SPL" > + depends on SPL > + depends on SPL_PCI > + depends on SPL_SATA_SUPPORT && DM_SCSI > + > config SATA_CEVA > bool "Ceva Sata controller" > depends on AHCI > diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile > index 4811b2f82c4e..cd88131dcd13 100644 > --- a/drivers/ata/Makefile > +++ b/drivers/ata/Makefile > @@ -5,7 +5,7 @@ > > obj-$(CONFIG_DWC_AHCI) += dwc_ahci.o > obj-$(CONFIG_AHCI) += ahci-uclass.o > -obj-$(CONFIG_AHCI_PCI) += ahci-pci.o > +obj-$(CONFIG_$(SPL_)AHCI_PCI) += ahci-pci.o > obj-$(CONFIG_SCSI_AHCI) += ahci.o > obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o > obj-$(CONFIG_FSL_SATA) += fsl_sata.o
Looks right to me, please submit it as a proper patch, thanks! -- Tom
signature.asc
Description: PGP signature