When booting over UART, sending U-Boot proper may take too much time and MCU watchdog will reset the board before U-Boot proper is loaded.
Better disable MCU watchdog in SPL when booting over UART. Signed-off-by: Marek Behún <marek.be...@nic.cz> --- board/CZ.NIC/turris_omnia/turris_omnia.c | 17 ++++++++++++++++- configs/turris_omnia_defconfig | 1 + 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c index a84a409f43..b0391c973d 100644 --- a/board/CZ.NIC/turris_omnia/turris_omnia.c +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c @@ -419,12 +419,27 @@ int board_early_init_f(void) return 0; } +void spl_board_init(void) +{ + /* + * If booting from UART, disable MCU watchdog in SPL, since uploading + * U-Boot proper can take too much time and trigger it. + */ + if (get_boot_device() == BOOT_DEVICE_UART) + disable_mcu_watchdog(); +} + int board_init(void) { /* address of boot parameters */ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - disable_mcu_watchdog(); + /* + * If not booting from UART, MCU watchdog was not disabled in SPL, + * disable it now. + */ + if (get_boot_device() != BOOT_DEVICE_UART) + disable_mcu_watchdog(); return 0; } diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig index cd443ceb30..67f8bdadaf 100644 --- a/configs/turris_omnia_defconfig +++ b/configs/turris_omnia_defconfig @@ -33,6 +33,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y +CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_I2C=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y -- 2.31.1