[PATCH 03/13] arm: shc: Change CONFIG_SYS_I2C_EEPROM_ADDR to EEPROM_ADDR

[Tom Rini]

The shc platforms do not make use of the rest of the EEPROM
infrastructure.  Rather than make more elaborate Kconfig logic, remove
this setting from the CONFIG namespace.

Cc: Heiko Schocher <h...@denx.de>
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
 board/bosch/shc/board.c      | 5 +++--
 include/configs/am335x_shc.h | 1 -
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/board/bosch/shc/board.c b/board/bosch/shc/board.c
index 13fd25e40710..a7a9775fdf4e 100644
--- a/board/bosch/shc/board.c
+++ b/board/bosch/shc/board.c
@@ -51,16 +51,17 @@ static int shc_eeprom_valid;
 /*
  * Read header information from EEPROM into global structure.
  */
+#define EEPROM_ADDR    0x50
 static int read_eeprom(void)
 {
        /* Check if baseboard eeprom is available */
-       if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
+       if (i2c_probe(EEPROM_ADDR)) {
                puts("Could not probe the EEPROM; something fundamentally wrong 
on the I2C bus.\n");
                return -ENODEV;
        }
 
        /* read the eeprom using i2c */
-       if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
+       if (i2c_read(EEPROM_ADDR, 0, 2, (uchar *)&header,
                     sizeof(header))) {
                puts("Could not read the EEPROM; something fundamentally wrong 
on the I2C bus.\n");
                return -EIO;
diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h
index 387d50d51199..5b0eba9afa42 100644
--- a/include/configs/am335x_shc.h
+++ b/include/configs/am335x_shc.h
@@ -225,7 +225,6 @@
 #define CONFIG_NET_RETRY_COUNT         10
 
 /* I2C configuration */
-#define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* Main EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 #define CONFIG_SYS_I2C_SPEED           400000
 #define CONFIG_SYS_I2C_SLAVE           1
-- 
2.17.1