To avoid confusion about the order of the GPIOs, the i2c-gpio binding
was updated to use a separate property for each GPIO instead of an
array. However, the driver only supports the old binding. Add support
for the new binding as well, so the driver continues to work as device
trees are updated.
Signed-off-by: Samuel Holland <sam...@sholland.org>
---
drivers/i2c/i2c-gpio.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/i2c/i2c-gpio.c b/drivers/i2c/i2c-gpio.c
index cf8f8f40359..1aedad5c8ed 100644
--- a/drivers/i2c/i2c-gpio.c
+++ b/drivers/i2c/i2c-gpio.c
@@ -336,8 +336,17 @@ static int i2c_gpio_of_to_plat(struct udevice *dev)
struct i2c_gpio_bus *bus = dev_get_priv(dev);
int ret;
+ /* "gpios" is deprecated and replaced by "sda-gpios" + "scl-gpios". */
ret = gpio_request_list_by_name(dev, "gpios", bus->gpios,
ARRAY_SIZE(bus->gpios), 0);
+ if (ret == -ENOENT) {
+ ret = gpio_request_by_name(dev, "sda-gpios", 0,
+ &bus->gpios[PIN_SDA], 0);
+ if (ret < 0)
+ goto error;
+ ret = gpio_request_by_name(dev, "scl-gpios", 0,
+ &bus->gpios[PIN_SCL], 0);
+ }
if (ret < 0)
goto error;
--
2.31.1
