Le 01/11/2010 06:13, sughosh ganu a écrit : > On Mon, Nov 1, 2010 at 4:34 AM, Albert ARIBAUD<albert.arib...@free.fr>wrote: > >> Le 31/10/2010 23:28, Alexander Holler a écrit : >>> On 31.10.2010 22:20, Albert Aribaud wrote: >>> >>>> Alexander, Darius, others who already tested the previous RFC patch, >>>> please test for non-regression. >>> >>> Still works here with that patch applied. But that isn't remarkable, >> because >>> >>>> #ifdef CONFIG_NAND_SPL >>> >>> that isn't defined here. ;) >> >> ... and tx25 seems not to have it defined either, so my change should >> not have affected Wolfgang's tests. :/ >> > > I think it is defined in nand_spl/board/karo/tx25/Makefile. We do get a > nand_spl/u-boot-spl when we compile for the tx25 board, which has a > reference to nand_boot.
Thanks Sugish. Which commands do you use to build the tx25? I tried make distclean; make tx25_config; make and ./MAKEALL tx25 ... but this ends up with the code in start.S as if NAND_SPL was not defined, i.e. calling board_inir_r, not nand_boot. > -sughosh Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot