Enabling MULTI_DTB_FIT and DTB_RESELECT can end up with multi DTBs in FIT
image placed and aligned only by 32bits (4bytes). Based on device tree
specification:
"Specifically, the memory reservation block shall be aligned to an 8-byte
boundary
and the structure block to a 4-byte boundary."
is 64bit (8bytes) alignment required. That's why make sure that
fit-dtb.blob and u-boot.itb as our primary target images for Xilinx ZynqMP
are all 64bit aligned.
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
Changes in v2:
- Update subject and commit message
- Enable 64bit alignment for all - reported by Andre
Makefile | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Makefile b/Makefile
index 269e353a28ad..0de909123cf9 100644
--- a/Makefile
+++ b/Makefile
@@ -1169,6 +1169,8 @@ MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T
firmware -C none -O u-boot \
-a 0 -e 0 -E \
$(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
-d /dev/null
+MKIMAGEFLAGS_fit-dtb.blob += -B 0x8
+
ifneq ($(EXT_DTB),)
u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB)
$(call if_changed,cat)
@@ -1431,6 +1433,7 @@ MKIMAGEFLAGS_u-boot.itb =
else
MKIMAGEFLAGS_u-boot.itb = -E
endif
+MKIMAGEFLAGS_u-boot.itb += -B 0x8
ifdef U_BOOT_ITS
u-boot.itb: u-boot-nodtb.bin \
--
2.33.0
