Both these configs exist. Stick to using CONFIG_SPL_HASH, and drop all
references to CONFIG_SPL_HASH_SUPPORT.
Signed-off-by: Alexandru Gagniuc <mr.nuke...@gmail.com>
---
common/Kconfig.boot | 2 +-
common/Makefile | 3 +--
common/spl/Kconfig | 12 +-----------
configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 2 +-
configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 2 +-
configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 2 +-
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 2 +-
configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 2 +-
include/configs/xilinx_zynqmp.h | 2 +-
9 files changed, 9 insertions(+), 20 deletions(-)
diff --git a/common/Kconfig.boot b/common/Kconfig.boot
index 2399d5849e..314f1e50a0 100644
--- a/common/Kconfig.boot
+++ b/common/Kconfig.boot
@@ -157,7 +157,7 @@ config SPL_FIT_SIGNATURE
select FIT_SIGNATURE
select SPL_FIT
select SPL_CRYPTO
- select SPL_HASH_SUPPORT
+ select SPL_HASH
imply SPL_RSA
imply SPL_RSA_VERIFY
select SPL_IMAGE_SIGN_INFO
diff --git a/common/Makefile b/common/Makefile
index 9063ed9391..592f340f1b 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -8,7 +8,7 @@ ifndef CONFIG_SPL_BUILD
obj-y += init/
obj-y += main.o
obj-y += exports.o
-obj-$(CONFIG_HASH) += hash.o
+obj-$(CONFIG_$(SPL_)HASH) += hash.o
obj-$(CONFIG_HUSH_PARSER) += cli_hush.o
obj-$(CONFIG_AUTOBOOT) += autoboot.o
@@ -66,7 +66,6 @@ ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_DFU
obj-$(CONFIG_DFU_OVER_USB) += dfu.o
endif
-obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o
obj-$(CONFIG_TPL_HASH_SUPPORT) += hash.o
obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index d69d1fa5f7..c75c8aaf08 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -477,16 +477,6 @@ config SPL_CRYPTO
this option to build the drivers in drivers/crypto as part of an
SPL build.
-config SPL_HASH_SUPPORT
- bool "Support hashing drivers"
- select SHA1
- select SHA256
- help
- Enable hashing drivers in SPL. These drivers can be used to
- accelerate secure boot processing in secure applications. Enable
- this option to build system-specific drivers for hash acceleration
- as part of an SPL build.
-
config TPL_HASH_SUPPORT
bool "Support hashing drivers in TPL"
depends on TPL
@@ -1193,7 +1183,7 @@ config SPL_USB_ETHER
config SPL_DFU
bool "Support DFU (Device Firmware Upgrade)"
- select SPL_HASH_SUPPORT
+ select SPL_HASH
select SPL_DFU_NO_RESET
depends on SPL_RAM_SUPPORT
help
diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
index 78196e6485..c5a6819a38 100644
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@@ -31,7 +31,7 @@ CONFIG_SPL_FSL_PBL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
+CONFIG_SPL_HASH=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index 3736445d47..93f6b2a668 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -27,7 +27,7 @@ CONFIG_SPL_FSL_PBL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0
CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
+CONFIG_SPL_HASH=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index b879a0c361..71c33ca463 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -27,7 +27,7 @@ CONFIG_SPL_FSL_PBL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
+CONFIG_SPL_HASH=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_SPL_WATCHDOG=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index c46d0dbedd..9d7ff790e0 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -27,7 +27,7 @@ CONFIG_SPL_FSL_PBL=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110
CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
+CONFIG_SPL_HASH=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
index 96d44799fa..62da4ecd71 100644
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@@ -33,7 +33,7 @@ CONFIG_MISC_INIT_R=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
CONFIG_SPL_CRYPTO=y
-CONFIG_SPL_HASH_SUPPORT=y
+CONFIG_SPL_HASH=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 262154cdff..42758ba758 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -258,7 +258,7 @@
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
# define CONFIG_SPL_ENV_SUPPORT
-# define CONFIG_SPL_HASH_SUPPORT
+# define CONFIG_SPL_HASH
# define CONFIG_ENV_MAX_ENTRIES 10
#endif
--
2.31.1
