On 11/02/2010 06:16 AM, Frias Renato-B13784 wrote: > Adds video support to mx51evk board, this board allows different displays. > This patch enables the WVGA TFT LCD panel only, remove comments from > include/configs/mx51evk.h to use it.
This patch is corrupted as the first one by your mailer. > +#ifdef CONFIG_LCD > +static struct fb_videomode claa_wvga = { > + "CLAA07LC0ACW", > + 57, /* Refresh */+ > + 800, /* xres */ > + 480, /* yres */ > + 37037, /* pixclock = 27Mhz */ > + 40, /* left margin */ > + 60, /* right margin */ > + 10, /* upper margin */ > + 10, /* lower margin */ > + 20, /* hsync-len */ > + 10, /* vsync-len */ > + 0, /* sync */ > + FB_VMODE_NONINTERLACED, /* vmode */ > + 0, /* flag */ > +}; It seems you start with trailing whitespaces instead of tabs > +#ifdef CONFIG_LCD > +void setup_iomux_ipu(void) > +{ > + /* DISP2_DAT [0:15] are configured by default */ > + mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4); > + mxc_iomux_set_pad(MX51_PIN_DI1_D1_CS, 0x85); With the vision2 I introduced constants to set pads (PAD_CTL_*). At least for new values, you should use it. > + /* DISP2_DRDY pin */ > + mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4); > + mxc_iomux_set_pad(MX51_PIN_DI_GP4, 0x80); Ditto > diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h > index f98438d..cd931ea 100644 > --- a/include/configs/mx51evk.h > +++ b/include/configs/mx51evk.h > @@ -211,6 +211,17 @@ > #define CONFIG_SYS_DDR_CLKSEL 0 > #define CONFIG_SYS_CLKTL_CBCDR 0x59E35100 > > +/* > + * Framebuffer and LCD > + */ > +/* Are the new defines inside a comment ? > +#define CONFIG_LCD > +#define CONFIG_VIDEO_MX5 > +#define LCD_BPP LCD_COLOR16 > +#define CONFIG_CMD_BMP > +#define CONFIG_BMP_16BPP > +*/ Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot