The official ls1028a binding of the driver uses the following as
compatibles:
compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
Change the ls1028a device tree and add this new compatible to the fsl
specific xhci driver, otherwise the generic dwc3 driver will be used
with the compatibles above.
Cc: Bin Meng <bmeng...@gmail.com>
Cc: Marek Vasut <ma...@denx.de>
Signed-off-by: Michael Walle <mich...@walle.cc>
---
arch/arm/dts/fsl-ls1028a.dtsi | 4 ++--
drivers/usb/host/xhci-fsl.c | 1 +
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index 34aad526fe..cc055e65e5 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -319,7 +319,7 @@
};
usb0: usb3@3100000 {
- compatible = "fsl,layerscape-dwc3";
+ compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
@@ -327,7 +327,7 @@
};
usb1: usb3@3110000 {
- compatible = "fsl,layerscape-dwc3";
+ compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
reg = <0x0 0x3110000 0x0 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
diff --git a/drivers/usb/host/xhci-fsl.c b/drivers/usb/host/xhci-fsl.c
index f062f12ade..80871908dc 100644
--- a/drivers/usb/host/xhci-fsl.c
+++ b/drivers/usb/host/xhci-fsl.c
@@ -159,6 +159,7 @@ static int xhci_fsl_remove(struct udevice *dev)
static const struct udevice_id xhci_usb_ids[] = {
{ .compatible = "fsl,layerscape-dwc3", },
+ { .compatible = "fsl,ls1028a-dwc3", },
{ }
};
--
2.30.2
