The MNT Reform 2 is a modular DIY laptop. In its initial version it is based on the BoundaryDevices i.MX8MQ SoM. Some parts have been lifted from BoundaryDevices official U-Boot downstream project.
This U-Boot patchset supports the serial console, the SD card and eMMC, Gigabit Ethernet and USB. Changes since v2: - Synced DTS with files in Linux git repo. - Added support for USB host ports. Patrick Wildt (2): arm: dts: imx8mq: add MNT Reform 2 board: mntre: imx8mq: Add MNT Reform 2 board support arch/arm/dts/Makefile | 1 + arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi | 11 + arch/arm/dts/imx8mq-mnt-reform2.dts | 213 ++++ arch/arm/dts/imx8mq-nitrogen-som.dtsi | 275 +++++ arch/arm/mach-imx/imx8m/Kconfig | 6 + board/mntre/imx8mq_reform2/Kconfig | 12 + board/mntre/imx8mq_reform2/MAINTAINERS | 7 + board/mntre/imx8mq_reform2/Makefile | 12 + board/mntre/imx8mq_reform2/imx8mq_reform2.c | 213 ++++ board/mntre/imx8mq_reform2/lpddr4_timing.c | 1014 +++++++++++++++++ .../mntre/imx8mq_reform2/lpddr4_timing_ch2.h | 95 ++ board/mntre/imx8mq_reform2/spl.c | 260 +++++ configs/imx8mq_reform2_defconfig | 67 ++ include/configs/imx8mq_reform2.h | 151 +++ 14 files changed, 2337 insertions(+) create mode 100644 arch/arm/dts/imx8mq-mnt-reform2-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mq-mnt-reform2.dts create mode 100644 arch/arm/dts/imx8mq-nitrogen-som.dtsi create mode 100644 board/mntre/imx8mq_reform2/Kconfig create mode 100644 board/mntre/imx8mq_reform2/MAINTAINERS create mode 100644 board/mntre/imx8mq_reform2/Makefile create mode 100644 board/mntre/imx8mq_reform2/imx8mq_reform2.c create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing.c create mode 100644 board/mntre/imx8mq_reform2/lpddr4_timing_ch2.h create mode 100644 board/mntre/imx8mq_reform2/spl.c create mode 100644 configs/imx8mq_reform2_defconfig create mode 100644 include/configs/imx8mq_reform2.h -- 2.32.0
