Re: [PATCH 2/2] board: dh_stm32mp1: Remove gpio_hog_probe_all() from board

[Marek Vasut]

On 9/1/21 11:51 AM, Patrice Chotard wrote:

DM_GPIO_HOG flag has been replaced by GPIO_HOG flag since a while in
commit 49b10cb49262 ("gpio: fixes for gpio-hog support").

And furthermore, gpio_hog_probe_all() is already called in board_r.c.
So gpio_hog_probe() can be removed from stm32mp1.c.

Signed-off-by: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Marek Vasut <ma...@denx.de>
---

  board/dhelectronics/dh_stm32mp1/board.c | 3 ---
  1 file changed, 3 deletions(-)

diff --git a/board/dhelectronics/dh_stm32mp1/board.c 
b/board/dhelectronics/dh_stm32mp1/board.c
index d7c1857c16..725b438d76 100644
--- a/board/dhelectronics/dh_stm32mp1/board.c
+++ b/board/dhelectronics/dh_stm32mp1/board.c
@@ -593,9 +593,6 @@ int board_init(void)
        /* address of boot parameters */
        gd->bd->bi_boot_params = STM32_DDR_BASE + 0x100;

- if (CONFIG_IS_ENABLED(DM_GPIO_HOG))

-               gpio_hog_probe_all();
-
        board_key_check();

This is likely OK, yes.