This board has not been converted to CONFIG_DM by the deadline.
Remove it.
Cc: Priyanka Jain <priyanka.j...@nxp.com>
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
arch/powerpc/cpu/mpc83xx/Kconfig | 52 ---
arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 | 6 +-
arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 | 6 +-
arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 | 6 +-
arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 | 6 +-
arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 | 6 +-
arch/powerpc/cpu/mpc83xx/hid/Kconfig | 4 +-
arch/powerpc/cpu/mpc83xx/hrcw/Kconfig | 117 ++----
arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h | 12 +-
arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr | 44 --
board/freescale/mpc8349emds/Kconfig | 25 --
board/freescale/mpc8349emds/MAINTAINERS | 9 -
board/freescale/mpc8349emds/Makefile | 8 -
board/freescale/mpc8349emds/ddr.c | 100 -----
board/freescale/mpc8349emds/mpc8349emds.c | 277 -------------
board/freescale/mpc8349emds/pci.c | 118 ------
configs/MPC8349EMDS_PCI64_defconfig | 127 ------
configs/MPC8349EMDS_SDRAM_defconfig | 138 -------
configs/MPC8349EMDS_SLAVE_defconfig | 127 ------
configs/MPC8349EMDS_defconfig | 130 ------
include/configs/MPC8349EMDS.h | 319 ---------------
include/configs/MPC8349EMDS_SDRAM.h | 376 ------------------
22 files changed, 45 insertions(+), 1968 deletions(-)
delete mode 100644 board/freescale/mpc8349emds/Kconfig
delete mode 100644 board/freescale/mpc8349emds/MAINTAINERS
delete mode 100644 board/freescale/mpc8349emds/Makefile
delete mode 100644 board/freescale/mpc8349emds/ddr.c
delete mode 100644 board/freescale/mpc8349emds/mpc8349emds.c
delete mode 100644 board/freescale/mpc8349emds/pci.c
delete mode 100644 configs/MPC8349EMDS_PCI64_defconfig
delete mode 100644 configs/MPC8349EMDS_SDRAM_defconfig
delete mode 100644 configs/MPC8349EMDS_SLAVE_defconfig
delete mode 100644 configs/MPC8349EMDS_defconfig
delete mode 100644 include/configs/MPC8349EMDS.h
delete mode 100644 include/configs/MPC8349EMDS_SDRAM.h
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index fcf4ef2b3600..cff98f7599fa 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -8,22 +8,6 @@ choice
prompt "Target select"
optional
-config TARGET_MPC8349EMDS
- bool "Support MPC8349EMDS"
- select ARCH_MPC8349
- select BOARD_EARLY_INIT_F
- select SYS_FSL_DDR
- select SYS_FSL_DDR_BE
- select SYS_FSL_HAS_DDR2
-
-config TARGET_MPC8349EMDS_SDRAM
- bool "Support MPC8349EMDS_SDRAM"
- select ARCH_MPC8349
- select BOARD_EARLY_INIT_F
- select SYS_FSL_DDR
- select SYS_FSL_DDR_BE
- select SYS_FSL_HAS_DDR2
-
config TARGET_MPC837XERDB
bool "Support MPC837XERDB"
select ARCH_MPC837X
@@ -173,15 +157,6 @@ config ARCH_MPC834X
bool
select SYS_CACHE_SHIFT_5
-config ARCH_MPC8349
- bool
- select ARCH_MPC834X
- select MPC83XX_PCI_SUPPORT
- select MPC83XX_TSEC1_SUPPORT
- select MPC83XX_TSEC2_SUPPORT
- select MPC83XX_LDP_PIN
- select MPC83XX_SECOND_I2C
-
config ARCH_MPC8360
bool
select MPC83XX_QUICC_ENGINE
@@ -220,36 +195,9 @@ source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig"
source "arch/powerpc/cpu/mpc83xx/arbiter/Kconfig"
source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig"
-menu "Legacy options"
-
-if ARCH_MPC8349
-
-#TODO(mario....@gdsys.cc): Remove when mpc83xx PCI has been converted to DM/DT
-choice
- prompt "PMC slot configuration"
-
-config PCI_ALL_PCI1
- bool "All PMC slots on PCI1"
-
-config PCI_ONE_PCI1
- bool "First PMC1 on PCI1"
-
-config PCI_TWO_PCI1
- bool "First two PMC1 on PCI1"
-
-endchoice
-
-config PCI_64BIT
- bool "PMC2 is 64bit"
-
-endif
-
-endmenu
-
config FSL_ELBC
bool
-source "board/freescale/mpc8349emds/Kconfig"
source "board/freescale/mpc837xerdb/Kconfig"
source "board/ids/ids8313/Kconfig"
source "board/keymile/Kconfig"
diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0
b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0
index 23e81ab0bf91..208eed0495ae 100644
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0
@@ -22,7 +22,7 @@ config BR0_PORTSIZE_16BIT
config BR0_PORTSIZE_32BIT
depends on !BR0_MACHINE_FCM
- depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+ depends on ARCH_MPC8360 || ARCH_MPC8379
bool "32-bit"
endchoice
@@ -58,11 +58,11 @@ config BR0_MACHINE_GPCM
bool "GPCM"
config BR0_MACHINE_FCM
- depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+ depends on !ARCH_MPC832X && !ARCH_MPC8360
bool "FCM"
config BR0_MACHINE_SDRAM
- depends on ARCH_MPC8349 || ARCH_MPC8360
+ depends on ARCH_MPC8360
bool "SDRAM"
config BR0_MACHINE_UPMA
diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1
b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1
index 08dcc7dd2ba3..1dc3e75076cb 100644
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1
@@ -22,7 +22,7 @@ config BR1_PORTSIZE_16BIT
config BR1_PORTSIZE_32BIT
depends on !BR1_MACHINE_FCM
- depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+ depends on ARCH_MPC8360 || ARCH_MPC8379
bool "32-bit"
endchoice
@@ -58,11 +58,11 @@ config BR1_MACHINE_GPCM
bool "GPCM"
config BR1_MACHINE_FCM
- depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+ depends on !ARCH_MPC832X && !ARCH_MPC8360
bool "FCM"
config BR1_MACHINE_SDRAM
- depends on ARCH_MPC8349 || ARCH_MPC8360
+ depends on ARCH_MPC8360
bool "SDRAM"
config BR1_MACHINE_UPMA
diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2
b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2
index 298d87f5e0f4..a9b2546cd88e 100644
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2
@@ -22,7 +22,7 @@ config BR2_PORTSIZE_16BIT
config BR2_PORTSIZE_32BIT
depends on !BR2_MACHINE_FCM
- depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+ depends on ARCH_MPC8360 || ARCH_MPC8379
bool "32-bit"
endchoice
@@ -58,11 +58,11 @@ config BR2_MACHINE_GPCM
bool "GPCM"
config BR2_MACHINE_FCM
- depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+ depends on !ARCH_MPC832X && !ARCH_MPC8360
bool "FCM"
config BR2_MACHINE_SDRAM
- depends on ARCH_MPC8349 || ARCH_MPC8360
+ depends on ARCH_MPC8360
bool "SDRAM"
config BR2_MACHINE_UPMA
diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3
b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3
index 963831bfcbd1..94442cdc9778 100644
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3
@@ -22,7 +22,7 @@ config BR3_PORTSIZE_16BIT
config BR3_PORTSIZE_32BIT
depends on !BR3_MACHINE_FCM
- depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+ depends on ARCH_MPC8360 || ARCH_MPC8379
bool "32-bit"
endchoice
@@ -58,11 +58,11 @@ config BR3_MACHINE_GPCM
bool "GPCM"
config BR3_MACHINE_FCM
- depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+ depends on !ARCH_MPC832X && !ARCH_MPC8360
bool "FCM"
config BR3_MACHINE_SDRAM
- depends on ARCH_MPC8349 || ARCH_MPC8360
+ depends on ARCH_MPC8360
bool "SDRAM"
config BR3_MACHINE_UPMA
diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4
b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4
index 0063dab96223..5d69385a23da 100644
--- a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4
@@ -22,7 +22,7 @@ config BR4_PORTSIZE_16BIT
config BR4_PORTSIZE_32BIT
depends on !BR4_MACHINE_FCM
- depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+ depends on ARCH_MPC8360 || ARCH_MPC8379
bool "32-bit"
endchoice
@@ -58,11 +58,11 @@ config BR4_MACHINE_GPCM
bool "GPCM"
config BR4_MACHINE_FCM
- depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+ depends on !ARCH_MPC832X && !ARCH_MPC8360
bool "FCM"
config BR4_MACHINE_SDRAM
- depends on ARCH_MPC8349 || ARCH_MPC8360
+ depends on ARCH_MPC8360
bool "SDRAM"
config BR4_MACHINE_UPMA
diff --git a/arch/powerpc/cpu/mpc83xx/hid/Kconfig
b/arch/powerpc/cpu/mpc83xx/hid/Kconfig
index c367ad2ce157..1f61108ceee6 100644
--- a/arch/powerpc/cpu/mpc83xx/hid/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/hid/Kconfig
@@ -434,7 +434,7 @@ config HID2_IWLCK_1
config HID2_IWLCK_2
bool "Way 0 through 2 locked"
-if ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+if ARCH_MPC8360 || ARCH_MPC8379
config HID2_IWLCK_3
bool "Way 0 through 3 locked"
@@ -470,7 +470,7 @@ config HID2_DWLCK_1
config HID2_DWLCK_2
bool "Way 0 through 2 locked"
-if ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+if ARCH_MPC8360 || ARCH_MPC8379
config HID2_DWLCK_3
bool "Way 0 through 3 locked"
diff --git a/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
b/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
index 75ec9c9a3464..71fa73801ae1 100644
--- a/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig
@@ -7,7 +7,7 @@ config LBMC_CLOCK_MODE_1_1
bool "1 : 1"
config LBMC_CLOCK_MODE_1_2
- depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+ depends on ARCH_MPC8360 || ARCH_MPC837X
bool "1 : 2"
endchoice
@@ -19,12 +19,12 @@ config DDR_MC_CLOCK_MODE_1_2
bool "1 : 2"
config DDR_MC_CLOCK_MODE_1_1
- depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+ depends on ARCH_MPC8360 || ARCH_MPC837X
bool "1 : 1"
endchoice
-if !ARCH_MPC8313 && !ARCH_MPC832X && !ARCH_MPC8349
+if !ARCH_MPC8313 && !ARCH_MPC832X
choice
prompt "System PLL VCO division"
@@ -67,43 +67,43 @@ config SYSTEM_PLL_FACTOR_6_1
bool "6 : 1"
config SYSTEM_PLL_FACTOR_7_1
- depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+ depends on ARCH_MPV8360 || ARCH_MPC837X
bool "7 : 1"
config SYSTEM_PLL_FACTOR_8_1
- depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+ depends on ARCH_MPV8360 || ARCH_MPC837X
bool "8 : 1"
config SYSTEM_PLL_FACTOR_9_1
- depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+ depends on ARCH_MPV8360 || ARCH_MPC837X
bool "9 : 1"
config SYSTEM_PLL_FACTOR_10_1
- depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+ depends on ARCH_MPV8360 || ARCH_MPC837X
bool "10 : 1"
config SYSTEM_PLL_FACTOR_11_1
- depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+ depends on ARCH_MPV8360 || ARCH_MPC837X
bool "11 : 1"
config SYSTEM_PLL_FACTOR_12_1
- depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+ depends on ARCH_MPV8360 || ARCH_MPC837X
bool "12 : 1"
config SYSTEM_PLL_FACTOR_13_1
- depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+ depends on ARCH_MPV8360 || ARCH_MPC837X
bool "13 : 1"
config SYSTEM_PLL_FACTOR_14_1
- depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+ depends on ARCH_MPV8360 || ARCH_MPC837X
bool "14 : 1"
config SYSTEM_PLL_FACTOR_15_1
- depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+ depends on ARCH_MPV8360 || ARCH_MPC837X
bool "15 : 1"
config SYSTEM_PLL_FACTOR_16_1
- depends on ARCH_MPC8349 || ARCH_MPV8360
+ depends on ARCH_MPV8360
bool "16 : 1"
endchoice
@@ -310,21 +310,6 @@ config PCI_HOST_MODE_ENABLE
endchoice
-if ARCH_MPC8349
-
-choice
- prompt "PCI 64-bit mode"
-
-config PCI_64BIT_MODE_DISABLE
- bool "Disabled"
-
-config PCI_64BIT_MODE_ENABLE
- bool "Enabled"
-
-endchoice
-
-endif
-
choice
prompt "PCI internal arbiter 1 mode"
@@ -336,21 +321,6 @@ config PCI_INT_ARBITER1_ENABLE
endchoice
-if ARCH_MPC8349
-
-choice
- prompt "PCI internal arbiter 2 mode"
-
-config PCI_INT_ARBITER2_DISABLE
- bool "Disabled"
-
-config PCI_INT_ARBITER2_ENABLE
- bool "Enabled"
-
-endchoice
-
-endif
-
if ARCH_MPC8360
choice
@@ -425,10 +395,6 @@ config BOOT_ROM_INTERFACE_PCI1
depends on MPC83XX_PCI_SUPPORT
bool "PCI1"
-config BOOT_ROM_INTERFACE_PCI2
- depends on MPC83XX_PCI_SUPPORT && ARCH_MPC8349
- bool "PCI2"
-
config BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
depends on ARCH_MPC837X
bool "PCI2"
@@ -448,15 +414,15 @@ config BOOT_ROM_INTERFACE_GPCM_16BIT
bool "Local bus GPCM - 16-bit ROM"
config BOOT_ROM_INTERFACE_GPCM_32BIT
- depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+ depends on ARCH_MPC8360 || ARCH_MPC837X
bool "Local bus GPCM - 32-bit ROM"
config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL
- depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+ depends on !ARCH_MPC832X && !ARCH_MPC8360
bool "Local bus NAND Flash- 8-bit small page ROM"
config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_LARGE
- depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+ depends on !ARCH_MPC832X && !ARCH_MPC8360
bool "Local bus NAND Flash- 8-bit large page ROM"
endchoice
@@ -467,11 +433,10 @@ choice
prompt "TSEC1 mode"
config TSEC1_MODE_MII
- depends on !ARCH_MPC8349
bool "MII"
config TSEC1_MODE_RMII
- depends on ARCH_MPC831X && !ARCH_MPC8349
+ depends on ARCH_MPC831X
bool "RMII"
config TSEC1_MODE_RGMII
@@ -481,14 +446,6 @@ config TSEC1_MODE_RTBI
depends on ARCH_MPC831X || ARCH_MPC837X
bool "RTBI"
-config TSEC1_MODE_GMII
- depends on ARCH_MPC8349
- bool "GMII"
-
-config TSEC1_MODE_TBI
- depends on ARCH_MPC8349
- bool "TBI"
-
config TSEC1_MODE_SGMII
depends on ARCH_MPC831X || ARCH_MPC837X
bool "SGMII"
@@ -503,11 +460,10 @@ choice
prompt "TSEC2 mode"
config TSEC2_MODE_MII
- depends on !ARCH_MPC8349
bool "MII"
config TSEC2_MODE_RMII
- depends on ARCH_MPC831X && !ARCH_MPC8349
+ depends on ARCH_MPC831X
bool "RMII"
config TSEC2_MODE_RGMII
@@ -517,14 +473,6 @@ config TSEC2_MODE_RTBI
depends on ARCH_MPC831X || ARCH_MPC837X
bool "RTBI"
-config TSEC2_MODE_GMII
- depends on ARCH_MPC8349
- bool "GMII"
-
-config TSEC2_MODE_TBI
- depends on ARCH_MPC8349
- bool "TBI"
-
config TSEC2_MODE_SGMII
depends on ARCH_MPC831X || ARCH_MPC837X
bool "SGMII"
@@ -559,7 +507,7 @@ endchoice
endif
-if ARCH_MPC831X || ARCH_MPC832X || ARCH_MPC8349 || ARCH_MPC8360
+if ARCH_MPC831X || ARCH_MPC832X || ARCH_MPC8360
choice
prompt "LALE timing"
@@ -603,7 +551,7 @@ config DDR_MC_CLOCK_MODE
config SYSTEM_PLL_VCO_DIV
int
- default 0 if ARCH_MPC8349 || ARCH_MPC832X
+ default 0 if ARCH_MPC832X
default 2 if ARCH_MPC8313
default 0 if SYSTEM_PLL_VCO_DIV_2 && !ARCH_MPC8360 && !ARCH_MPC837X
default 1 if SYSTEM_PLL_VCO_DIV_4 && !ARCH_MPC8360 && !ARCH_MPC837X
@@ -675,7 +623,6 @@ config BOOT_ROM_INTERFACE
hex
default 0x0 if BOOT_ROM_INTERFACE_DDR_SDRAM
default 0x4 if BOOT_ROM_INTERFACE_PCI1
- default 0x8 if BOOT_ROM_INTERFACE_PCI2
default 0x8 if BOOT_ROM_INTERFACE_ESDHC
default 0xc if BOOT_ROM_INTERFACE_SPI
default 0xc if BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
@@ -690,26 +637,18 @@ config TSEC1_MODE
default 0x0 if !MPC83XX_TSEC1_SUPPORT
default 0x0 if TSEC1_MODE_MII
default 0x1 if TSEC1_MODE_RMII
- default 0x3 if TSEC1_MODE_RGMII && !ARCH_MPC8349
- default 0x5 if TSEC1_MODE_RTBI && !ARCH_MPC8349
+ default 0x3 if TSEC1_MODE_RGMII
+ default 0x5 if TSEC1_MODE_RTBI
default 0x6 if TSEC1_MODE_SGMII
- default 0x0 if TSEC1_MODE_RGMII && ARCH_MPC8349
- default 0x1 if TSEC1_MODE_RTBI && ARCH_MPC8349
- default 0x2 if TSEC1_MODE_GMII
- default 0x3 if TSEC1_MODE_TBI
config TSEC2_MODE
hex
default 0x0 if !MPC83XX_TSEC2_SUPPORT
default 0x0 if TSEC2_MODE_MII
default 0x1 if TSEC2_MODE_RMII
- default 0x3 if TSEC2_MODE_RGMII && !ARCH_MPC8349
- default 0x5 if TSEC2_MODE_RTBI && !ARCH_MPC8349
+ default 0x3 if TSEC2_MODE_RGMII
+ default 0x5 if TSEC2_MODE_RTBI
default 0x6 if TSEC2_MODE_SGMII
- default 0x0 if TSEC2_MODE_RGMII && ARCH_MPC8349
- default 0x1 if TSEC2_MODE_RTBI && ARCH_MPC8349
- default 0x2 if TSEC2_MODE_GMII
- default 0x3 if TSEC2_MODE_TBI
config SECONDARY_DDR_IO
int
@@ -792,9 +731,7 @@ config PCI_HOST_MODE
config PCI_64BIT_MODE
int
- default 0 if !ARCH_MPC8349
- default 0 if PCI_64BIT_MODE_DISABLE
- default 1 if PCI_64BIT_MODE_ENABLE
+ default 0
config PCI_INT_ARBITER1
int
@@ -804,9 +741,7 @@ config PCI_INT_ARBITER1
config PCI_INT_ARBITER2
int
- default 0 if !ARCH_MPC8349
- default 0 if PCI_INT_ARBITER2_DISABLE
- default 1 if PCI_INT_ARBITER2_ENABLE
+ default 0
config PCI_CLOCK_OUTPUT_DRIVE
int
diff --git a/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h
b/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h
index 7d66ba726b91..0f3426789181 100644
--- a/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h
+++ b/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h
@@ -1,11 +1,3 @@
-#ifdef CONFIG_ARCH_MPC8349
-#define TSEC1_MODE_SHIFT 17
-#define TSEC2_MODE_SHIFT 19
-#else
-#define TSEC1_MODE_SHIFT 18
-#define TSEC2_MODE_SHIFT 21
-#endif
-
#define CONFIG_SYS_HRCW_LOW (\
(CONFIG_LBMC_CLOCK_MODE << (31 - 0)) |\
(CONFIG_DDR_MC_CLOCK_MODE << (31 - 1)) |\
@@ -28,8 +20,8 @@
(CONFIG_BOOT_SEQUENCER << (31 - 7)) |\
(CONFIG_SOFTWARE_WATCHDOG << (31 - 8)) |\
(CONFIG_BOOT_ROM_INTERFACE << (31 - 13)) |\
- (CONFIG_TSEC1_MODE << (31 - TSEC1_MODE_SHIFT)) |\
- (CONFIG_TSEC2_MODE << (31 - TSEC2_MODE_SHIFT)) |\
+ (CONFIG_TSEC1_MODE << (31 - 18)) |\
+ (CONFIG_TSEC2_MODE << (31 - 21)) |\
(CONFIG_SECONDARY_DDR_IO << (31 - 27)) |\
(CONFIG_TRUE_LITTLE_ENDIAN << (31 - 28)) |\
(CONFIG_LALE_TIMING << (31 - 29)) |\
diff --git a/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr
b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr
index f32309e6c0f0..33e1295df149 100644
--- a/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr
+++ b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr
@@ -38,50 +38,6 @@ endchoice
endif
-if ARCH_MPC8349
-
-choice
- prompt "TSEC1 emergency priority"
-
-config SPCR_TSEC1EP_UNSET
- bool "Don't set value"
-
-config SPCR_TSEC1EP_0
- bool "Level 0 (lowest priority)"
-
-config SPCR_TSEC1EP_1
- bool "Level 1"
-
-config SPCR_TSEC1EP_2
- bool "Level 2"
-
-config SPCR_TSEC1EP_3
- bool "Level 3 (highest priority)"
-
-endchoice
-
-choice
- prompt "TSEC2 emergency priority"
-
-config SPCR_TSEC2EP_UNSET
- bool "Don't set value"
-
-config SPCR_TSEC2EP_0
- bool "Level 0 (lowest priority)"
-
-config SPCR_TSEC2EP_1
- bool "Level 1"
-
-config SPCR_TSEC2EP_2
- bool "Level 2"
-
-config SPCR_TSEC2EP_3
- bool "Level 3 (highest priority)"
-
-endchoice
-
-endif
-
config SPCR_OPT
hex
default 0x0 if SPCR_OPT_UNSET
diff --git a/board/freescale/mpc8349emds/Kconfig
b/board/freescale/mpc8349emds/Kconfig
deleted file mode 100644
index d1541180799e..000000000000
--- a/board/freescale/mpc8349emds/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-if TARGET_MPC8349EMDS
-
-config SYS_BOARD
- default "mpc8349emds"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "MPC8349EMDS"
-
-endif
-
-if TARGET_MPC8349EMDS_SDRAM
-
-config SYS_BOARD
- default "mpc8349emds"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "MPC8349EMDS_SDRAM"
-
-endif
diff --git a/board/freescale/mpc8349emds/MAINTAINERS
b/board/freescale/mpc8349emds/MAINTAINERS
deleted file mode 100644
index a8f26a9a3169..000000000000
--- a/board/freescale/mpc8349emds/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-MPC8349EMDS BOARD
-#M: Kim Phillips <kim.phill...@freescale.com>
-S: Orphan (since 2018-05)
-F: board/freescale/mpc8349emds/
-F: include/configs/MPC8349EMDS.h
-F: configs/MPC8349EMDS_defconfig
-F: configs/MPC8349EMDS_SDRAM_defconfig
-F: configs/MPC8349EMDS_PCI64_defconfig
-F: configs/MPC8349EMDS_SLAVE_defconfig
diff --git a/board/freescale/mpc8349emds/Makefile
b/board/freescale/mpc8349emds/Makefile
deleted file mode 100644
index af02f65cb004..000000000000
--- a/board/freescale/mpc8349emds/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
-
-obj-y += mpc8349emds.o
-obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
diff --git a/board/freescale/mpc8349emds/ddr.c
b/board/freescale/mpc8349emds/ddr.c
deleted file mode 100644
index ac5ddc6d94b8..000000000000
--- a/board/freescale/mpc8349emds/ddr.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-struct board_specific_parameters {
- u32 n_ranks;
- u32 datarate_mhz_high;
- u32 clk_adjust;
- u32 cpo;
- u32 write_data_delay;
- u32 force_2t;
-};
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_parameters udimm0[] = {
- /*
- * memory controller 0
- * num| hi| clk| cpo|wrdata|2T
- * ranks| mhz|adjst| | delay|
- */
- {2, 300, 4, 4, 2, 0},
- {2, 365, 4, 6, 2, 0},
- {2, 450, 4, 7, 2, 0},
- {2, 850, 4, 31, 2, 0},
- {1, 300, 4, 4, 2, 0},
- {1, 365, 4, 6, 2, 0},
- {1, 450, 4, 7, 2, 0},
- {1, 850, 4, 31, 2, 0},
- {}
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
- unsigned int i;
- ulong ddr_freq;
-
- if (ctrl_num != 0) /* we have only one controller */
- return;
- for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
- if (pdimm[i].n_ranks)
- break;
- }
- if (i >= CONFIG_DIMM_SLOTS_PER_CTLR) /* no DIMM */
- return;
-
- pbsp = udimm0;
-
- /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
- * freqency and n_banks specified in board_specific_parameters table.
- */
- ddr_freq = get_ddr_freq(0) / 1000000;
- while (pbsp->datarate_mhz_high) {
- if (pbsp->n_ranks == pdimm[i].n_ranks) {
- if (ddr_freq <= pbsp->datarate_mhz_high) {
- popts->clk_adjust = pbsp->clk_adjust;
- popts->cpo_override = pbsp->cpo;
- popts->write_data_delay =
- pbsp->write_data_delay;
- popts->twot_en = pbsp->force_2t;
- goto found;
- }
- pbsp_highest = pbsp;
- }
- pbsp++;
- }
-
- if (pbsp_highest) {
- printf("Error: board specific timing not found "
- "for data rate %lu MT/s!\n"
- "Trying to use the highest speed (%u) parameters\n",
- ddr_freq, pbsp_highest->datarate_mhz_high);
- popts->clk_adjust = pbsp_highest->clk_adjust;
- popts->cpo_override = pbsp_highest->cpo;
- popts->write_data_delay = pbsp_highest->write_data_delay;
- popts->twot_en = pbsp_highest->force_2t;
- } else {
- panic("DIMM is not supported by this board");
- }
-
-found:
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
- */
- popts->half_strength_driver_enable = 0;
- popts->dqs_config = 0; /* only true DQS signal is used on board */
-}
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c
b/board/freescale/mpc8349emds/mpc8349emds.c
deleted file mode 100644
index eff248104dc0..000000000000
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ /dev/null
@@ -1,277 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, w...@denx.de.
- */
-
-#include <common.h>
-#include <fdt_support.h>
-#include <init.h>
-#include <ioports.h>
-#include <mpc83xx.h>
-#include <asm/bitops.h>
-#include <asm/global_data.h>
-#include <asm/mpc8349_pci.h>
-#include <i2c.h>
-#include <spi.h>
-#include <miiphy.h>
-#ifdef CONFIG_SYS_FSL_DDR2
-#include <fsl_ddr_sdram.h>
-#else
-#include <spd_sdram.h>
-#endif
-#include <linux/delay.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <linux/libfdt.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int fixed_sdram(void);
-void sdram_init(void);
-
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx)
-void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-int board_early_init_f (void)
-{
- volatile u8* bcsr = (volatile u8*)CONFIG_SYS_BCSR;
-
- /* Enable flash write */
- bcsr[1] &= ~0x01;
-
-#ifdef CONFIG_SYS_USE_MPC834XSYS_USB_PHY
- /* Use USB PHY on SYS board */
- bcsr[5] |= 0x02;
-#endif
-
- return 0;
-}
-
-int dram_init(void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- phys_size_t msize = 0;
-
- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
- return -ENXIO;
-
- /* DDR SDRAM - Main SODIMM */
- im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR;
-#if defined(CONFIG_SPD_EEPROM)
-#ifndef CONFIG_SYS_FSL_DDR2
- msize = spd_sdram() * 1024 * 1024;
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- ddr_enable_ecc(msize);
-#endif
-#else
- msize = fsl_ddr_sdram();
-#endif
-#else
- msize = fixed_sdram() * 1024 * 1024;
-#endif
- /*
- * Initialize SDRAM if it is on local bus.
- */
- sdram_init();
-
- /* set total bus SDRAM size(bytes) -- DDR */
- gd->ram_size = msize;
-
- return 0;
-}
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- * fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-int fixed_sdram(void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- u32 msize = CONFIG_SYS_DDR_SIZE;
- u32 ddr_size = msize << 20; /* DDR size in bytes */
- u32 ddr_size_log2 = __ilog2(ddr_size);
-
- im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000;
- im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) &
LAWAR_SIZE);
-
-#if (CONFIG_SYS_DDR_SIZE != 256)
-#warning Currenly any ddr size other than 256 is not supported
-#endif
-#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0)
-#warning Chip select bounds is only configurable in 16MB increments
-#endif
- im->ddr.csbnds[2].csbnds =
- ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
- (((CONFIG_SYS_SDRAM_BASE + ddr_size - 1) >>
- CSBNDS_EA_SHIFT) & CSBNDS_EA);
- im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
-
- /* currently we use only one CS, so disable the other banks */
- im->ddr.cs_config[0] = 0;
- im->ddr.cs_config[1] = 0;
- im->ddr.cs_config[3] = 0;
-
- im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
- im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-
- im->ddr.sdram_cfg =
- SDRAM_CFG_SREN
- | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
- im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
-
- im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
- udelay(200);
-
- /* enable DDR controller */
- im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
- return msize;
-}
-#endif/*!CONFIG_SYS_SPD_EEPROM*/
-
-
-int checkboard (void)
-{
- /*
- * Warning: do not read the BCSR registers here
- *
- * There is a timing bug in the 8349E and 8349EA BCSR code
- * version 1.2 (read from BCSR 11) that will cause the CFI
- * flash initialization code to overwrite BCSR 0, disabling
- * the serial ports and gigabit ethernet
- */
-
- puts("Board: Freescale MPC8349EMDS\n");
- return 0;
-}
-
-/*
- * if MPC8349EMDS is soldered with SDRAM
- */
-#if defined(CONFIG_SYS_BR2_PRELIM) \
- && defined(CONFIG_SYS_OR2_PRELIM) \
- && defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
- && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-
-void sdram_init(void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile fsl_lbc_t *lbc = &immap->im_lbc;
- uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
- const u32 lsdmr_common = LSDMR_RFEN | LSDMR_BSMA1516 | LSDMR_RFCR8 |
- LSDMR_PRETOACT6 | LSDMR_ACTTORW3 | LSDMR_BL8 |
- LSDMR_WRC3 | LSDMR_CL3;
- /*
- * Setup SDRAM Base and Option Registers, already done in cpu_init.c
- */
-
- /* setup mtrpt, lsrt and lbcr for LB bus */
- lbc->lbcr = 0x00000000;
- /* LB refresh timer prescal, 266MHz/32 */
- lbc->mrtpr = 0x20000000;
- /* LB sdram refresh timer, about 6us */
- lbc->lsrt = 0x32000000;
- asm("sync");
-
- /*
- * Configure the SDRAM controller Machine Mode Register.
- */
-
- /* 0x40636733; normal operation */
- lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
-
- /* 0x68636733; precharge all the banks */
- lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
- asm("sync");
- *sdram_addr = 0xff;
- udelay(100);
-
- /* 0x48636733; auto refresh */
- lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
- asm("sync");
- /*1 times*/
- *sdram_addr = 0xff;
- udelay(100);
- /*2 times*/
- *sdram_addr = 0xff;
- udelay(100);
- /*3 times*/
- *sdram_addr = 0xff;
- udelay(100);
- /*4 times*/
- *sdram_addr = 0xff;
- udelay(100);
- /*5 times*/
- *sdram_addr = 0xff;
- udelay(100);
- /*6 times*/
- *sdram_addr = 0xff;
- udelay(100);
- /*7 times*/
- *sdram_addr = 0xff;
- udelay(100);
- /*8 times*/
- *sdram_addr = 0xff;
- udelay(100);
-
- /* 0x58636733; mode register write operation */
- lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
- asm("sync");
- *sdram_addr = 0xff;
- udelay(100);
-
- /* 0x40636733; normal operation */
- lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
- asm("sync");
- *sdram_addr = 0xff;
- udelay(100);
-}
-#else
-void sdram_init(void)
-{
-}
-#endif
-
-/*
- * The following are used to control the SPI chip selects for the SPI command.
- */
-#ifdef CONFIG_MPC8XXX_SPI
-
-#define SPI_CS_MASK 0x80000000
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
- iopd->dat &= ~SPI_CS_MASK;
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- volatile gpio83xx_t *iopd = &((immap_t *)CONFIG_SYS_IMMR)->gpio[0];
-
- iopd->dat |= SPI_CS_MASK;
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
- ft_pci_setup(blob, bd);
-#endif
-
- return 0;
-}
-#endif
diff --git a/board/freescale/mpc8349emds/pci.c
b/board/freescale/mpc8349emds/pci.c
deleted file mode 100644
index 8c76c46d4200..000000000000
--- a/board/freescale/mpc8349emds/pci.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
- */
-
-#include <init.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <common.h>
-#include <mpc83xx.h>
-#include <pci.h>
-#include <i2c.h>
-#include <asm/fsl_i2c.h>
-#include <linux/delay.h>
-
-static struct pci_region pci1_regions[] = {
- {
- bus_start: CONFIG_SYS_PCI1_MEM_BASE,
- phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
- size: CONFIG_SYS_PCI1_MEM_SIZE,
- flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
- },
- {
- bus_start: CONFIG_SYS_PCI1_IO_BASE,
- phys_start: CONFIG_SYS_PCI1_IO_PHYS,
- size: CONFIG_SYS_PCI1_IO_SIZE,
- flags: PCI_REGION_IO
- },
- {
- bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
- phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
- size: CONFIG_SYS_PCI1_MMIO_SIZE,
- flags: PCI_REGION_MEM
- },
-};
-
-#ifdef CONFIG_MPC83XX_PCI2
-static struct pci_region pci2_regions[] = {
- {
- bus_start: CONFIG_SYS_PCI2_MEM_BASE,
- phys_start: CONFIG_SYS_PCI2_MEM_PHYS,
- size: CONFIG_SYS_PCI2_MEM_SIZE,
- flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
- },
- {
- bus_start: CONFIG_SYS_PCI2_IO_BASE,
- phys_start: CONFIG_SYS_PCI2_IO_PHYS,
- size: CONFIG_SYS_PCI2_IO_SIZE,
- flags: PCI_REGION_IO
- },
- {
- bus_start: CONFIG_SYS_PCI2_MMIO_BASE,
- phys_start: CONFIG_SYS_PCI2_MMIO_PHYS,
- size: CONFIG_SYS_PCI2_MMIO_SIZE,
- flags: PCI_REGION_MEM
- },
-};
-#endif
-
-#ifndef CONFIG_PCISLAVE
-void pib_init(void)
-{
- u8 val8, orig_i2c_bus;
- /*
- * Assign PIB PMC slot to desired PCI bus
- */
- /* Switch temporarily to I2C bus #2 */
- orig_i2c_bus = i2c_get_bus_num();
- i2c_set_bus_num(1);
-
- val8 = 0;
- i2c_write(0x23, 0x6, 1, &val8, 1);
- i2c_write(0x23, 0x7, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x23, 0x2, 1, &val8, 1);
- i2c_write(0x23, 0x3, 1, &val8, 1);
-
- val8 = 0;
- i2c_write(0x26, 0x6, 1, &val8, 1);
- val8 = 0x34;
- i2c_write(0x26, 0x7, 1, &val8, 1);
-#if defined(CONFIG_PCI_64BIT)
- val8 = 0xf4; /* PMC2:PCI1/64-bit */
-#elif defined(CONFIG_PCI_ALL_PCI1)
- val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */
-#elif defined(CONFIG_PCI_ONE_PCI1)
- val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */
-#else
- val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */
-#endif
- i2c_write(0x26, 0x2, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x26, 0x3, 1, &val8, 1);
- val8 = 0;
- i2c_write(0x27, 0x6, 1, &val8, 1);
- i2c_write(0x27, 0x7, 1, &val8, 1);
- val8 = 0xff;
- i2c_write(0x27, 0x2, 1, &val8, 1);
- val8 = 0xef;
- i2c_write(0x27, 0x3, 1, &val8, 1);
- asm("eieio");
-
-#if defined(CONFIG_PCI_64BIT)
- printf("PCI1: 64-bit on PMC2\n");
-#elif defined(CONFIG_PCI_ALL_PCI1)
- printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n");
-#elif defined(CONFIG_PCI_ONE_PCI1)
- printf("PCI1: 32-bit on PMC1\n");
- printf("PCI2: 32-bit on PMC2, PMC3\n");
-#else
- printf("PCI1: 32-bit on PMC1, PMC2\n");
- printf("PCI2: 32-bit on PMC3\n");
-#endif
- /* Reset to original I2C bus */
- i2c_set_bus_num(orig_i2c_bus);
-}
-
-#endif /* CONFIG_PCISLAVE */
diff --git a/configs/MPC8349EMDS_PCI64_defconfig
b/configs/MPC8349EMDS_PCI64_defconfig
deleted file mode 100644
index 457a1eef031a..000000000000
--- a/configs/MPC8349EMDS_PCI64_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_64BIT_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo;echo Type \"run flash_nfs\" to mount root filesystem over
NFS;echo"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/MPC8349EMDS_SDRAM_defconfig
b/configs/MPC8349EMDS_SDRAM_defconfig
deleted file mode 100644
index 5f568977cb28..000000000000
--- a/configs/MPC8349EMDS_SDRAM_defconfig
+++ /dev/null
@@ -1,138 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS_SDRAM=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_PCI_INT_ARBITER2_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_LBLAW2=y
-CONFIG_LBLAW2_BASE=0xF0000000
-CONFIG_LBLAW2_NAME="SDRAM"
-CONFIG_LBLAW2_LENGTH_64_MBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="SDRAM"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_BR2_PORTSIZE_32BIT=y
-CONFIG_BR2_MACHINE_SDRAM=y
-CONFIG_OR2_COLS_9=y
-CONFIG_OR2_ROWS_13=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_PCI_ONE_PCI1=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/MPC8349EMDS_SLAVE_defconfig
b/configs/MPC8349EMDS_SLAVE_defconfig
deleted file mode 100644
index 763d6fa398c2..000000000000
--- a/configs/MPC8349EMDS_SLAVE_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66666666
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_64BIT_MODE_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_PCI_ONE_PCI1=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="PCISLAVE"
-CONFIG_BOOTDELAY=6
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo;echo Type \"run flash_nfs\" to mount root filesystem over
NFS;echo"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/MPC8349EMDS_defconfig b/configs/MPC8349EMDS_defconfig
deleted file mode 100644
index df9c9d3a4010..000000000000
--- a/configs/MPC8349EMDS_defconfig
+++ /dev/null
@@ -1,130 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_CLK_FREQ=66000000
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349EMDS=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_PCI_INT_ARBITER2_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_32_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE2400000
-CONFIG_LBLAW1_NAME="BCSR"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_32_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="BCSR"
-CONFIG_BR1_OR1_BASE=0xE2400000
-CONFIG_OR1_XAM_SET=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_PCI_ONE_PCI1=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo;echo Type \"run flash_nfs\" to mount root filesystem over
NFS;echo"
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE0A0000
-CONFIG_DDR_ECC=y
-CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x3000
-CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
-CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=400000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
deleted file mode 100644
index 2f1fc6a6a2b9..000000000000
--- a/include/configs/MPC8349EMDS.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2006-2010
- * Wolfgang Denk, DENX Software Engineering, w...@denx.de.
- */
-
-/*
- * mpc8349emds board configuration file
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300 1 /* E300 Family */
-
-#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
-
-/*
- * DDR Setup
- */
-#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
-
-/*
- * SYS_FSL_DDR2 is selected in Kconfig to use unified DDR driver
- * unselect it to use old spd_sdram.c
- */
-#define CONFIG_SYS_SPD_BUS_NUM 0
-#define SPD_EEPROM_ADDRESS1 0x52
-#define SPD_EEPROM_ADDRESS2 0x51
-#define CONFIG_DIMM_SLOTS_PER_CTLR 2
-#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \
- | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-/*
- * DDRCDR - DDR Control Driver Register
- */
-#define CONFIG_SYS_DDRCDR_VALUE 0x80080001
-
-#if defined(CONFIG_SPD_EEPROM)
-/*
- * Determine DDR configuration from I2C interface.
- */
-#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
-#else
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_SYS_DDR_SIZE 256 /* MB */
-#define CONFIG_SYS_DDR_CS2_CONFIG (CSCONFIG_EN \
- | CSCONFIG_ROW_BIT_13 \
- | CSCONFIG_COL_BIT_10)
-#define CONFIG_SYS_DDR_TIMING_1 0x36332321
-#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need
tuning */
-#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
-#define CONFIG_SYS_DDR_INTERVAL 0x04060100 /* autocharge,no open
page */
-
-/* the default burst length is 4 - for 64-bit data path */
- /* DLL,normal,seq,4/2.5, 4 burst len */
-#define CONFIG_SYS_DDR_MODE 0x00000022
-#endif
-
-/*
- * SDRAM on the Local Bus
- */
-#define CONFIG_SYS_LBC_SDRAM_BASE 0xF0000000 /* Localbus SDRAM */
-#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */
-#define CONFIG_SYS_FLASH_SIZE 32 /* max flash size in MB */
-
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of
monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-/*
- * BCSR register on local bus 32KB, 8-bit wide for MDS config reg
- */
-#define CONFIG_SYS_BCSR 0xE2400000
- /* Access window base at BCSR base */
-
-
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
-
-/* SPI */
-#undef CONFIG_SOFT_SPI /* SPI bit-banged */
-
-/* GPIOs. Used as SPI chip selects */
-#define CONFIG_SYS_GPIO1_PRELIM
-#define CONFIG_SYS_GPIO1_DIR 0xC0000000 /* SPI CS on 0, LED on 1 */
-#define CONFIG_SYS_GPIO1_DAT 0xC0000000 /* Both are active LOW */
-
-/* TSEC */
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
-#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
-
-/* USB */
-#define CONFIG_SYS_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
-
-#define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE
-#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000
-#define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE
-#define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI2_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000
-#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */
-
-#if defined(CONFIG_PCI)
-
-#if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xFIXME
- #define PCI_ENET0_MEMADDR 0xFIXME
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
-#endif
-
-#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-
-#endif /* CONFIG_PCI */
-
-/*
- * TSEC configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_GMII 1 /* MII PHY management */
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "TSEC1"
-#define TSEC1_PHY_ADDR 0
-#define TSEC2_PHY_ADDR 1
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC2_FLAGS TSEC_GIGABIT
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME "TSEC0"
-
-#endif /* CONFIG_TSEC_ENET */
-
-/*
- * Configure on-board RTC
- */
-#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
-
-/*
- * Environment
- */
-#ifndef CONFIG_SYS_RAMBOOT
-/* Address and size of Redundant Environment Sector */
-#endif
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
- /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */
-
-/*
- * System performance
- */
-#define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */
-#define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode
(0-3) */
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH 0
-#define CONFIG_SYS_SICRL SICRL_LDP_A
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH0
-#endif
-
-#define CONFIG_HOSTNAME "mpc8349emds"
-#define CONFIG_ROOTPATH "/nfsroot/rootfs"
-#define CONFIG_BOOTFILE "uImage"
-
-#define CONFIG_EXTRA_ENV_SETTINGS
\
- "netdev=eth0\0" \
- "hostname=mpc8349emds\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
- "flash_nfs=run nfsargs addip addtty;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addtty;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
- "bootm\0" \
- "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \
- "update=protect off fe000000 fe03ffff; " \
- "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"\
- "upd=run load update\0" \
- "fdtaddr=780000\0" \
- "fdtfile=mpc834x_mds.dtb\0" \
- ""
-
-#define NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \
- "$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8349EMDS_SDRAM.h
b/include/configs/MPC8349EMDS_SDRAM.h
deleted file mode 100644
index d6a151d20ce6..000000000000
--- a/include/configs/MPC8349EMDS_SDRAM.h
+++ /dev/null
@@ -1,376 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2006-2010
- * Wolfgang Denk, DENX Software Engineering, w...@denx.de.
- */
-
-/*
- * mpc8349emds board configuration file
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300 1 /* E300 Family */
-
-#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
-
-/*
- * DDR Setup
- */
-#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
-
-/*
- * SYS_FSL_DDR2 is selected in Kconfig to use unified DDR driver
- * unselect it to use old spd_sdram.c
- */
-#define CONFIG_SYS_SPD_BUS_NUM 0
-#define SPD_EEPROM_ADDRESS1 0x52
-#define SPD_EEPROM_ADDRESS2 0x51
-#define CONFIG_DIMM_SLOTS_PER_CTLR 2
-#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \
- | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-/*
- * DDRCDR - DDR Control Driver Register
- */
-#define CONFIG_SYS_DDRCDR_VALUE 0x80080001
-
-#if defined(CONFIG_SPD_EEPROM)
-/*
- * Determine DDR configuration from I2C interface.
- */
-#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
-#else
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_SYS_DDR_SIZE 256 /* MB */
-#define CONFIG_SYS_DDR_CS2_CONFIG (CSCONFIG_EN \
- | CSCONFIG_ROW_BIT_13 \
- | CSCONFIG_COL_BIT_10)
-#define CONFIG_SYS_DDR_TIMING_1 0x36332321
-#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need
tuning */
-#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
-#define CONFIG_SYS_DDR_INTERVAL 0x04060100 /* autocharge,no open
page */
-
-/* the default burst length is 4 - for 64-bit data path */
- /* DLL,normal,seq,4/2.5, 4 burst len */
-#define CONFIG_SYS_DDR_MODE 0x00000022
-#endif
-
-/*
- * SDRAM on the Local Bus
- */
-#define CONFIG_SYS_LBC_SDRAM_BASE 0xF0000000 /* Localbus SDRAM */
-#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */
-#define CONFIG_SYS_FLASH_SIZE 32 /* max flash size in MB */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of
monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-/*
- * BCSR register on local bus 32KB, 8-bit wide for MDS config reg
- */
-#define CONFIG_SYS_BCSR 0xE2400000
- /* Access window base at BCSR base */
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
-
-/*
- * The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory.
- */
-
-/* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */
-/*
- * Base Register 2 and Option Register 2 configure SDRAM.
- * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
- *
- * For BR2, need:
- * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
- * port-size = 32-bits = BR2[19:20] = 11
- * no parity checking = BR2[21:22] = 00
- * SDRAM for MSEL = BR2[24:26] = 011
- * Valid = BR[31] = 1
- *
- * 0 4 8 12 16 20 24 28
- * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
- */
-
-/*
- * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
- *
- * For OR2, need:
- * 64MB mask for AM, OR2[0:7] = 1111 1100
- * XAM, OR2[17:18] = 11
- * 9 columns OR2[19-21] = 010
- * 13 rows OR2[23-25] = 100
- * EAD set for extra time OR[31] = 1
- *
- * 0 4 8 12 16 20 24 28
- * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
- */
-
-
- /* LB sdram refresh timer, about 6us */
-#define CONFIG_SYS_LBC_LSRT 0x32000000
- /* LB refresh timer prescal, 266MHz/32 */
-#define CONFIG_SYS_LBC_MRTPR 0x20000000
-
-#define CONFIG_SYS_LBC_LSDMR_COMMON (LSDMR_RFEN \
- | LSDMR_BSMA1516 \
- | LSDMR_RFCR8 \
- | LSDMR_PRETOACT6 \
- | LSDMR_ACTTORW3 \
- | LSDMR_BL8 \
- | LSDMR_WRC3 \
- | LSDMR_CL3)
-
-/*
- * SDRAM Controller configuration sequence.
- */
-#define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL)
-#define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH)
-#define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW)
-#define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL)
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
-
-/* SPI */
-#undef CONFIG_SOFT_SPI /* SPI bit-banged */
-
-/* GPIOs. Used as SPI chip selects */
-#define CONFIG_SYS_GPIO1_PRELIM
-#define CONFIG_SYS_GPIO1_DIR 0xC0000000 /* SPI CS on 0, LED on 1 */
-#define CONFIG_SYS_GPIO1_DAT 0xC0000000 /* Both are active LOW */
-
-/* TSEC */
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
-#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
-
-/* USB */
-#define CONFIG_SYS_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
-#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
-
-#define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE
-#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000
-#define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE
-#define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI2_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000
-#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */
-
-#if defined(CONFIG_PCI)
-
-#if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xFIXME
- #define PCI_ENET0_MEMADDR 0xFIXME
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
-#endif
-
-#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-
-#endif /* CONFIG_PCI */
-
-/*
- * TSEC configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#define CONFIG_GMII 1 /* MII PHY management */
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "TSEC1"
-#define TSEC1_PHY_ADDR 0
-#define TSEC2_PHY_ADDR 1
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC2_FLAGS TSEC_GIGABIT
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME "TSEC0"
-
-#endif /* CONFIG_TSEC_ENET */
-
-/*
- * Configure on-board RTC
- */
-#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
-
-/*
- * Environment
- */
-#ifndef CONFIG_SYS_RAMBOOT
-/* Address and size of Redundant Environment Sector */
-#endif
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
- /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */
-
-/*
- * System performance
- */
-#define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority
(0-3) */
-#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority
(0-3) */
-#define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */
-#define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode
(0-3) */
-
-/* System IO Config */
-#define CONFIG_SYS_SICRH 0
-#define CONFIG_SYS_SICRL SICRL_LDP_A
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH0
-#endif
-
-#define CONFIG_HOSTNAME "mpc8349emds"
-#define CONFIG_ROOTPATH "/nfsroot/rootfs"
-#define CONFIG_BOOTFILE "uImage"
-
-#define CONFIG_EXTRA_ENV_SETTINGS
\
- "netdev=eth0\0" \
- "hostname=mpc8349emds\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
- "flash_nfs=run nfsargs addip addtty;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addtty;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
- "bootm\0" \
- "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \
- "update=protect off fe000000 fe03ffff; " \
- "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"\
- "upd=run load update\0" \
- "fdtaddr=780000\0" \
- "fdtfile=mpc834x_mds.dtb\0" \
- ""
-
-#define NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \
- "$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-#endif /* __CONFIG_H */
--
2.17.1
