[PATCH] i2c: mvtwsi: Add support for DM clocks and resets

[Samuel Holland]

The controller may need to have clocks/resets enabled for it to work.
Add support for this. Since the clocks/resets are optional on some
platforms (per the device tree binding), do not prevent probing the
controller if they are missing.

Signed-off-by: Samuel Holland <sam...@sholland.org>
---

 drivers/i2c/mvtwsi.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c
index d33e2c7c9d8..236bfb8d8e7 100644
--- a/drivers/i2c/mvtwsi.c
+++ b/drivers/i2c/mvtwsi.c
@@ -17,7 +17,9 @@
 #include <linux/bitops.h>
 #include <linux/compat.h>
 #if CONFIG_IS_ENABLED(DM_I2C)
+#include <clk.h>
 #include <dm.h>
+#include <reset.h>
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -835,7 +837,18 @@ static int mvtwsi_i2c_bind(struct udevice *bus)
 static int mvtwsi_i2c_probe(struct udevice *bus)
 {
        struct mvtwsi_i2c_dev *dev = dev_get_priv(bus);
+       struct reset_ctl reset;
+       struct clk clk;
        uint actual_speed;
+       int ret;
+
+       ret = reset_get_by_index(bus, 0, &reset);
+       if (!ret)
+               reset_deassert(&reset);
+
+       ret = clk_get_by_index(bus, 0, &clk);
+       if (!ret)
+               clk_enable(&clk);
 
        __twsi_i2c_init(dev->base, dev->speed, dev->slaveadd, &actual_speed);
        dev->speed = actual_speed;
-- 
2.31.1