>-----Original Message-----
>From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Gaurav Jain
>Sent: Friday, September 3, 2021 12:33 PM
>To: u-boot@lists.denx.de
>Cc: Stefano Babic <sba...@denx.de>; Fabio Estevam <feste...@gmail.com>;
>Peng Fan <peng....@nxp.com>; Simon Glass <s...@chromium.org>; Priyanka
>Jain <priyanka.j...@nxp.com>; Ye Li <ye...@nxp.com>; Horia Geanta
><horia.gea...@nxp.com>; Ji Luo <ji....@nxp.com>; Franck Lenormand
><franck.lenorm...@nxp.com>; Silvano Di Ninno <silvano.dini...@nxp.com>;
>Sahil Malhotra <sahil.malho...@nxp.com>; Pankaj Gupta
><pankaj.gu...@nxp.com>; Varun Sethi <v.se...@nxp.com>; dl-uboot-imx
><uboot-...@nxp.com>; Shengzhou Liu <shengzhou....@nxp.com>; Mingkai
>Hu <mingkai...@nxp.com>; Rajesh Bhagat <rajesh.bha...@nxp.com>;
>Meenakshi Aggarwal <meenakshi.aggar...@nxp.com>; Wasim Khan
><wasim.k...@nxp.com>; Alison Wang <alison.w...@nxp.com>; Pramod
>Kumar <pramod.kuma...@nxp.com>; Andy Tang <andy.t...@nxp.com>;
>Adrian Alonso <adrian.alo...@nxp.com>; Vladimir Oltean
><olte...@gmail.com>; Gaurav Jain <gaurav.j...@nxp.com>
>Subject: [PATCH v2 14/15] PPC: Enable Job ring driver model in U-Boot
>
>removed sec_init() call and CONFIG_FSL_CAAM from defconfig.
>sec is initialized based on job ring information processed from device tree.
>
>Signed-off-by: Gaurav Jain <gaurav.j...@nxp.com>
>---
> arch/powerpc/cpu/mpc85xx/Kconfig | 44
>+++++++++++++++++++++++++++
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 +++++++++--
> arch/powerpc/include/asm/u-boot-ppc.h | 13 ++++++++
> arch/powerpc/include/asm/u-boot.h | 1 +
> configs/P2041RDB_defconfig | 1 -
> configs/P3041DS_defconfig | 1 -
> configs/P4080DS_defconfig | 1 -
> configs/P5040DS_defconfig | 1 -
> configs/T1024RDB_defconfig | 1 -
> configs/T1042D4RDB_defconfig | 1 -
> configs/T2080QDS_defconfig | 1 -
> configs/T2080RDB_defconfig | 1 -
> configs/T4240RDB_defconfig | 1 -
> 13 files changed, 73 insertions(+), 11 deletions(-) create mode 100644
>arch/powerpc/include/asm/u-boot-ppc.h
>
<snip>
Reviewed-by: Priyanka Jain <priyanka.j...@nxp.com>