[PATCH 3/4] net: enetc: remove support for "xgmii" phy-mode

[Vladimir Oltean]

The enetc driver runs only on NXP LS1028A, which most definitely does
not support the parallel 10G interface, just USXGMII, and that only up
to 2.5Gbps (toned down from 10 Gbps via symbol replication).

Signed-off-by: Vladimir Oltean <vladimir.olt...@nxp.com>
---
 drivers/net/fsl_enetc.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/fsl_enetc.c b/drivers/net/fsl_enetc.c
index 045527dcf7d9..f56f9e7a129b 100644
--- a/drivers/net/fsl_enetc.c
+++ b/drivers/net/fsl_enetc.c
@@ -226,7 +226,6 @@ static void enetc_setup_mac_iface(struct udevice *dev,
        case PHY_INTERFACE_MODE_RGMII_TXID:
                enetc_init_rgmii(dev, phydev);
                break;
-       case PHY_INTERFACE_MODE_XGMII:
        case PHY_INTERFACE_MODE_USXGMII:
        case PHY_INTERFACE_MODE_10GBASER:
                /* set ifmode to (US)XGMII */
@@ -294,7 +293,6 @@ static void enetc_start_pcs(struct udevice *dev)
        case PHY_INTERFACE_MODE_2500BASEX:
                enetc_init_sgmii(dev);
                break;
-       case PHY_INTERFACE_MODE_XGMII:
        case PHY_INTERFACE_MODE_USXGMII:
        case PHY_INTERFACE_MODE_10GBASER:
                enetc_init_sxgmii(dev);
-- 
2.25.1