On Mon, Aug 30, 2021 at 10:40 AM Adam Ford <aford...@gmail.com> wrote: > > There are three boards from Beacon, RZ/G2 M/N/H which all > use the same board file, but different device trees. > Add code to automatically select the proper device tree > based on the CPU type. > > Signed-off-by: Adam Ford <aford...@gmail.com> >
Marek, I was wondering if you had any feedback on this series. You asked if I could consolidate all three of my RZ/G2 boards to reduce the amount of duplicated code, so this series attempts to do that. adam > diff --git a/board/beacon/beacon-rzg2m/beacon-rzg2m.c > b/board/beacon/beacon-rzg2m/beacon-rzg2m.c > index c12ff77fb2..b3521fcbc1 100644 > --- a/board/beacon/beacon-rzg2m/beacon-rzg2m.c > +++ b/board/beacon/beacon-rzg2m/beacon-rzg2m.c > @@ -36,3 +36,19 @@ void reset_cpu(void) > { > writel(RST_CODE, RST_CA57RESCNT); > } > + > +#if IS_ENABLED(CONFIG_MULTI_DTB_FIT) > +int board_fit_config_name_match(const char *name) > +{ > + if (!strcmp(rzg_get_cpu_name(), "R8A774A1") && !strcmp(name, > "r8a774a1-beacon-rzg2m-kit")) > + return 0; > + > + if (!strcmp(rzg_get_cpu_name(), "R8A774B1") && !strcmp(name, > "r8a774b1-beacon-rzg2n-kit")) > + return 0; > + > + if (!strcmp(rzg_get_cpu_name(), "R8A774E1") && !strcmp(name, > "r8a774e1-beacon-rzg2h-kit")) > + return 0; > + > + return -1; > +} > +#endif > -- > 2.25.1 >