On Thu, 2010-11-04 at 09:36 -0700, Peter Tyser wrote: > Glad to hear. I'll submit an official patch shortly. Just to make > sure, have you tried running one of the nand-spl images after the > patch > I sent yesterday? It'd be good to get confirmation that the > -gc-sections doesn't have any accidental side effects as I wasn't able > to test it. Because of the second bug, I can not test it based on the top of the uboot tree. I just use 2010.06 version plus your two patches, and run the nand-spl image on MPC8569MDS board. Only "NAND boot... transfering control" is printed out in the terminal. It means the final u-boot image doesn't work.
Then I make changes to u-boot-nand.lds and u-boot-nand_spl.lds, following the changes you made for u-boot.lds, I get the first u-boot line "U-Boot 2010.06..." printed out which means the final u-boot image can work a little bit. But nothing else is showed up in terminal. Do you have any idea on how to make changes to u-boot-nand/_spl.lds? Thanks. Haiying _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot