Signed-off-by: Wolfgang Denk <w...@denx.de>
---
README | 1 -
arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c | 2 --
arch/xtensa/include/asm/arch-dc232b/core.h | 2 --
arch/xtensa/include/asm/arch-dc232b/tie-asm.h | 4 ----
arch/xtensa/include/asm/arch-dc233c/core.h | 3 ---
arch/xtensa/include/asm/arch-dc233c/tie-asm.h | 4 ----
arch/xtensa/include/asm/arch-de212/core.h | 3 ---
arch/xtensa/include/asm/cacheasm.h | 2 --
board/freescale/ls1088a/ddr.c | 2 --
board/freescale/t208xqds/README | 1 -
board/xilinx/zynq/zynq-microzed/ps7_init_gpl.c | 4 ----
board/xilinx/zynq/zynq-zc702/ps7_init_gpl.c | 4 ----
board/xilinx/zynq/zynq-zc706/ps7_init_gpl.c | 4 ----
board/xilinx/zynq/zynq-zed/ps7_init_gpl.c | 4 ----
cmd/bedbug.c | 4 ----
doc/README.dfutftp | 2 --
doc/device-tree-bindings/firmware/linaro,optee-tz.txt | 1 -
drivers/gpio/hi6220_gpio.c | 2 --
drivers/i2c/mxc_i2c.c | 2 --
drivers/mtd/nand/raw/nand_util.c | 2 --
drivers/net/e1000.c | 4 ----
drivers/video/stb_truetype.h | 1 -
fs/btrfs/kernel-shared/btrfs_tree.h | 1 -
include/configs/etamin.h | 1 -
include/fsl-mc/fsl_dpni.h | 2 --
include/linux/mtd/flashchip.h | 1 -
include/linux/serial_reg.h | 1 -
27 files changed, 64 deletions(-)
diff --git a/README b/README
index a3f81e4aed..91bf2a4e30 100644
--- a/README
+++ b/README
@@ -300,7 +300,6 @@ board_init_r():
- loads U-Boot or (in falcon mode) Linux
-
Configuration Options:
----------------------
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
index 3b41c7d49b..bb7d24b4b7 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -14,8 +14,6 @@
#include "sys_env_lib.h"
#include "ctrl_pex.h"
-
-
/*
* serdes_seq_db - holds all serdes sequences, their size and the
* relevant index in the data array initialized in serdes_seq_init
diff --git a/arch/xtensa/include/asm/arch-dc232b/core.h
b/arch/xtensa/include/asm/arch-dc232b/core.h
index 92ea0dfe35..c1453f719e 100644
--- a/arch/xtensa/include/asm/arch-dc232b/core.h
+++ b/arch/xtensa/include/asm/arch-dc232b/core.h
@@ -127,8 +127,6 @@
#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */
-
-
/****************************************************************************
Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
****************************************************************************/
diff --git a/arch/xtensa/include/asm/arch-dc232b/tie-asm.h
b/arch/xtensa/include/asm/arch-dc232b/tie-asm.h
index 7003cad40d..35a26dca7c 100644
--- a/arch/xtensa/include/asm/arch-dc232b/tie-asm.h
+++ b/arch/xtensa/include/asm/arch-dc232b/tie-asm.h
@@ -26,7 +26,6 @@
#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */
-
/* Macro to save all non-coprocessor (extra) custom TIE and optional state
* (not including zero-overhead loop registers).
* Save area ptr (clobbered): ptr (1 byte aligned)
@@ -109,11 +108,8 @@
.endif
.endm // xchal_ncp_load
-
-
#define XCHAL_NCP_NUM_ATMPS 2
-
#define XCHAL_SA_NUM_ATMPS 2
#endif /*_XTENSA_CORE_TIE_ASM_H*/
diff --git a/arch/xtensa/include/asm/arch-dc233c/core.h
b/arch/xtensa/include/asm/arch-dc233c/core.h
index ca07d8ee21..4646cdbfb4 100644
--- a/arch/xtensa/include/asm/arch-dc233c/core.h
+++ b/arch/xtensa/include/asm/arch-dc233c/core.h
@@ -149,13 +149,10 @@
#define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */
-
-
/****************************************************************************
Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
****************************************************************************/
-
#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
/*----------------------------------------------------------------------
diff --git a/arch/xtensa/include/asm/arch-dc233c/tie-asm.h
b/arch/xtensa/include/asm/arch-dc233c/tie-asm.h
index 317d4e1312..7b3d1f3c57 100644
--- a/arch/xtensa/include/asm/arch-dc233c/tie-asm.h
+++ b/arch/xtensa/include/asm/arch-dc233c/tie-asm.h
@@ -31,8 +31,6 @@
| ((ccuse) & XTHAL_SAS_ANYCC) \
| ((abi) & XTHAL_SAS_ANYABI) )
-
-
/*
* Macro to save all non-coprocessor (extra) custom TIE and optional state
* (not including zero-overhead loop registers).
@@ -164,8 +162,6 @@
#define XCHAL_NCP_NUM_ATMPS 1
-
-
#define XCHAL_SA_NUM_ATMPS 1
#endif /*_XTENSA_CORE_TIE_ASM_H*/
diff --git a/arch/xtensa/include/asm/arch-de212/core.h
b/arch/xtensa/include/asm/arch-de212/core.h
index 7268692d0e..443fd459ca 100644
--- a/arch/xtensa/include/asm/arch-de212/core.h
+++ b/arch/xtensa/include/asm/arch-de212/core.h
@@ -206,13 +206,10 @@
#define XCHAL_HAVE_DCACHE_DYN_WAYS 0 /* Dcache dynamic way support */
-
-
/****************************************************************************
Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
****************************************************************************/
-
#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
/*----------------------------------------------------------------------
diff --git a/arch/xtensa/include/asm/cacheasm.h
b/arch/xtensa/include/asm/cacheasm.h
index 6d321f8866..69448cfff7 100644
--- a/arch/xtensa/include/asm/cacheasm.h
+++ b/arch/xtensa/include/asm/cacheasm.h
@@ -134,7 +134,6 @@
.endm
-
.macro ___flush_invalidate_dcache_range ar as at
#if XCHAL_DCACHE_SIZE
@@ -171,7 +170,6 @@
.endm
-
.macro ___flush_invalidate_dcache_page ar as
#if XCHAL_DCACHE_SIZE
diff --git a/board/freescale/ls1088a/ddr.c b/board/freescale/ls1088a/ddr.c
index 995c429601..9e0941cc9d 100644
--- a/board/freescale/ls1088a/ddr.c
+++ b/board/freescale/ls1088a/ddr.c
@@ -88,8 +88,6 @@ found:
pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
pbsp->wrlvl_ctl_3);
-
-
popts->half_strength_driver_enable = 0;
/*
* Write leveling override
diff --git a/board/freescale/t208xqds/README b/board/freescale/t208xqds/README
index d690857f2e..9678c39e34 100755
--- a/board/freescale/t208xqds/README
+++ b/board/freescale/t208xqds/README
@@ -158,7 +158,6 @@ Start Address End Address Definition
Max size
0xE8000000 0xE801FFFF RCW (current bank) 128KB
-
Software configurations and board settings
------------------------------------------
1. NOR boot:
diff --git a/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.c
b/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.c
index 323835ab1b..c2a6f9199a 100644
--- a/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.c
+++ b/board/xilinx/zynq/zynq-microzed/ps7_init_gpl.c
@@ -12399,8 +12399,6 @@ unsigned long ps7_post_config_1_0[] = {
//
};
-
-
#include "xil_io.h"
unsigned long *ps7_mio_init_data = ps7_mio_init_data_3_0;
@@ -12477,8 +12475,6 @@ ps7_init()
ret = ps7_config (ps7_ddr_init_data);
if (ret != PS7_INIT_SUCCESS) return ret;
-
-
// Peripherals init
ret = ps7_config (ps7_peripherals_init_data);
if (ret != PS7_INIT_SUCCESS) return ret;
diff --git a/board/xilinx/zynq/zynq-zc702/ps7_init_gpl.c
b/board/xilinx/zynq/zynq-zc702/ps7_init_gpl.c
index 248c72861c..fd102a3ce4 100644
--- a/board/xilinx/zynq/zynq-zc702/ps7_init_gpl.c
+++ b/board/xilinx/zynq/zynq-zc702/ps7_init_gpl.c
@@ -12732,8 +12732,6 @@ unsigned long ps7_post_config_1_0[] = {
//
};
-
-
#include "xil_io.h"
unsigned long *ps7_mio_init_data = ps7_mio_init_data_3_0;
@@ -12810,8 +12808,6 @@ ps7_init()
ret = ps7_config (ps7_ddr_init_data);
if (ret != PS7_INIT_SUCCESS) return ret;
-
-
// Peripherals init
ret = ps7_config (ps7_peripherals_init_data);
if (ret != PS7_INIT_SUCCESS) return ret;
diff --git a/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.c
b/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.c
index cc90a4c94b..796e5b0c5f 100644
--- a/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.c
+++ b/board/xilinx/zynq/zynq-zc706/ps7_init_gpl.c
@@ -12639,8 +12639,6 @@ unsigned long ps7_post_config_1_0[] = {
//
};
-
-
#include "xil_io.h"
unsigned long *ps7_mio_init_data = ps7_mio_init_data_3_0;
@@ -12717,8 +12715,6 @@ ps7_init()
ret = ps7_config (ps7_ddr_init_data);
if (ret != PS7_INIT_SUCCESS) return ret;
-
-
// Peripherals init
ret = ps7_config (ps7_peripherals_init_data);
if (ret != PS7_INIT_SUCCESS) return ret;
diff --git a/board/xilinx/zynq/zynq-zed/ps7_init_gpl.c
b/board/xilinx/zynq/zynq-zed/ps7_init_gpl.c
index 8fb3908e02..baf89a5800 100644
--- a/board/xilinx/zynq/zynq-zed/ps7_init_gpl.c
+++ b/board/xilinx/zynq/zynq-zed/ps7_init_gpl.c
@@ -12297,8 +12297,6 @@ unsigned long ps7_post_config_1_0[] = {
//
};
-
-
#include "xil_io.h"
unsigned long *ps7_mio_init_data = ps7_mio_init_data_3_0;
@@ -12375,8 +12373,6 @@ ps7_init()
ret = ps7_config (ps7_ddr_init_data);
if (ret != PS7_INIT_SUCCESS) return ret;
-
-
// Peripherals init
ret = ps7_config (ps7_peripherals_init_data);
if (ret != PS7_INIT_SUCCESS) return ret;
diff --git a/cmd/bedbug.c b/cmd/bedbug.c
index 549c9056dd..0bd67fcf47 100644
--- a/cmd/bedbug.c
+++ b/cmd/bedbug.c
@@ -39,7 +39,6 @@ int bedbug_puts (const char *str)
} /* bedbug_puts */
-
/* ======================================================================
* Initialize the bug_ctx structure used by the bedbug debugger. This is
* specific to the CPU since each has different debug registers and
@@ -53,7 +52,6 @@ int bedbug_init(void)
} /* bedbug_init */
-
/* ======================================================================
* Entry point from the interpreter to the disassembler. Repeated calls
* will resume from the last disassembled address.
@@ -183,7 +181,6 @@ void do_bedbug_breakpoint (struct pt_regs *regs)
} /* do_bedbug_breakpoint */
-
/* ======================================================================
* Called from the CPU-specific breakpoint handling routine. Enter a
* mini main loop until the stopped flag is cleared from the breakpoint
@@ -241,7 +238,6 @@ void bedbug_main_loop (unsigned long addr, struct pt_regs
*regs)
} /* bedbug_main_loop */
-
/* ======================================================================
* Interpreter command to continue from a breakpoint. Just clears the
* stopped flag in the context so that the breakpoint routine will
diff --git a/doc/README.dfutftp b/doc/README.dfutftp
index a3341bbb61..1206507911 100644
--- a/doc/README.dfutftp
+++ b/doc/README.dfutftp
@@ -88,7 +88,6 @@ for pure DFU USB transfer.
possible to set large enough default buffer (8 MiB @ BBB)
-
FIT image format for download
-----------------------------
@@ -110,7 +109,6 @@ should look like
where "u-boot.bin" is the DFU entity name to be stored.
-
To do
-----
diff --git a/doc/device-tree-bindings/firmware/linaro,optee-tz.txt
b/doc/device-tree-bindings/firmware/linaro,optee-tz.txt
index d38834c67d..2d75c2b1b5 100644
--- a/doc/device-tree-bindings/firmware/linaro,optee-tz.txt
+++ b/doc/device-tree-bindings/firmware/linaro,optee-tz.txt
@@ -21,7 +21,6 @@ the reference implementation maintained by Linaro.
in drivers/tee/optee/optee_smc.h
-
Example:
firmware {
optee {
diff --git a/drivers/gpio/hi6220_gpio.c b/drivers/gpio/hi6220_gpio.c
index 608ad64f65..e287c31b93 100644
--- a/drivers/gpio/hi6220_gpio.c
+++ b/drivers/gpio/hi6220_gpio.c
@@ -54,8 +54,6 @@ static int hi6220_gpio_get_value(struct udevice *dev,
unsigned gpio)
return !!readb(bank->base + (BIT(gpio + 2)));
}
-
-
static const struct dm_gpio_ops gpio_hi6220_ops = {
.direction_input = hi6220_gpio_direction_input,
.direction_output = hi6220_gpio_direction_output,
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 003aa33f6e..bf56ffa5ad 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -798,8 +798,6 @@ void bus_i2c_init(int index, int speed, int unused,
bus_i2c_set_bus_speed(&mxc_i2c_buses[index], speed);
}
-
-
/*
* Init I2C Bus
*/
diff --git a/drivers/mtd/nand/raw/nand_util.c b/drivers/mtd/nand/raw/nand_util.c
index 00c3c6c412..5cc256bf20 100644
--- a/drivers/mtd/nand/raw/nand_util.c
+++ b/drivers/mtd/nand/raw/nand_util.c
@@ -545,8 +545,6 @@ int nand_verify(struct mtd_info *mtd, loff_t ofs, size_t
len, u_char *buf)
return rval ? -EIO : 0;
}
-
-
/**
* nand_write_skip_bad:
*
diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
index 5bdcede8f1..4e34248ff6 100644
--- a/drivers/net/e1000.c
+++ b/drivers/net/e1000.c
@@ -5251,11 +5251,7 @@ e1000_configure_tx(struct e1000_hw *hw)
mdelay(20);
}
-
-
E1000_WRITE_REG(hw, TCTL, tctl);
-
-
}
/**
diff --git a/drivers/video/stb_truetype.h b/drivers/video/stb_truetype.h
index 5d00bff9fd..26f4ac2ca8 100644
--- a/drivers/video/stb_truetype.h
+++ b/drivers/video/stb_truetype.h
@@ -497,7 +497,6 @@ STBTT_DEF void stbtt_GetBakedQuad(stbtt_bakedchar
*chardata, int pw, int ph, //
// It's inefficient; you might want to c&p it and optimize it.
-
//////////////////////////////////////////////////////////////////////////////
//
// NEW TEXTURE BAKING API
diff --git a/fs/btrfs/kernel-shared/btrfs_tree.h
b/fs/btrfs/kernel-shared/btrfs_tree.h
index 6a76d1e456..d8eff0b912 100644
--- a/fs/btrfs/kernel-shared/btrfs_tree.h
+++ b/fs/btrfs/kernel-shared/btrfs_tree.h
@@ -334,7 +334,6 @@
#define BTRFS_STRING_ITEM_KEY 253
-
/* 32 bytes in various csum fields */
#define BTRFS_CSUM_SIZE 32
diff --git a/include/configs/etamin.h b/include/configs/etamin.h
index 880149fb89..a823aff6b5 100644
--- a/include/configs/etamin.h
+++ b/include/configs/etamin.h
@@ -110,7 +110,6 @@
#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
-
#undef COMMON_ENV_DFU_ARGS
#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \
"setenv bootargs ${bootargs};" \
diff --git a/include/fsl-mc/fsl_dpni.h b/include/fsl-mc/fsl_dpni.h
index 96d81d9934..e5e7338192 100644
--- a/include/fsl-mc/fsl_dpni.h
+++ b/include/fsl-mc/fsl_dpni.h
@@ -173,8 +173,6 @@ do { \
MC_RSP_OP(cmd, 2, 0, 64, uint64_t, state->options);\
} while (0)
-
-
/* cmd, param, offset, width, type, arg_name */
#define DPNI_CMD_SET_PRIMARY_MAC_ADDR(cmd, mac_addr) \
do { \
diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h
index 666480db93..265e89f02b 100644
--- a/include/linux/mtd/flashchip.h
+++ b/include/linux/mtd/flashchip.h
@@ -52,7 +52,6 @@ typedef enum {
} flstate_t;
-
/* NOTE: confusingly, this can be used to refer to more than one chip at a
time,
if they're interleaved. This can even refer to individual partitions on
the same physical chip when present. */
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index ef020ad162..dca7efa142 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -288,7 +288,6 @@
#define UART_ACR_ASREN 0x80 /* Additional status enable */
-
/*
* These definitions are for the RSA-DV II/S card, from
*
--
2.31.1
