On Wed, Sep 29, 2021 at 8:55 AM Tim Harvey <thar...@gateworks.com> wrote: > > On Tue, Sep 28, 2021 at 6:51 PM Fabio Estevam <feste...@gmail.com> wrote: > > > > Hi Tim, > > > > On Tue, Sep 28, 2021 at 2:00 PM Tim Harvey <thar...@gateworks.com> wrote: > > > > > I would think the other board maintainers would have raised a red flag > > > if things broke for their boards, I just haven't tested it in quite > > > some time for gwventana_*_defconfig. > > > > I have just tested wandboard with the top of tree U-Boot and it > > displays the splash screen correctly. > > > > Can you check this commit from Anatolij? > > > > commit b2ec22b52d6c1541cabf7103a098e6c80f27637b > > Author: Anatolij Gustschin <ag...@denx.de> > > Date: Wed Sep 18 16:55:49 2019 +0200 > > > > imx: wandboard: fix splash logo drawing > > > > After mxc_ipuv3 DM_VIDEO conversion showing splash image > > doesn't work. Fix this. Also enable white on black console > > configuration as it used to be with cfb_console driver. > > > > Signed-off-by: Anatolij Gustschin <ag...@denx.de> > > > > Fabio, > > Thanks - that was it. > > There were a couple of other things needed for dm video conversion > that were not taken care of back when it was done. Specifically: > CONFIG_SPLASH_SCREEN enabled > CONFIG_CMD_BMP enabled > splashiamge env var > > These were not needed for splash prior to the dm video conversion. >
One last question on this. I have never used U-Boot vidconsole before. It does work if I 'setenv stdout serial,videconsole' but if I saveenv and reboot vidconsole is not enabled. Should I expect it to be or is it expected that if you want vidconsole you need to do a setenv in preboot? Best regards, Tim