On 07/09/2021 06:22, Tomasz Bielecki wrote: > Hi all, > > Starting with: > ac804143cf (refs/bisect/bad) mmc: rockchip_sdhci: add phy and clock > config for rk3399 > Pinebook Pro won't boot. > U-boot is installed on the internal MMC, the serial console shows this: > > U-Boot TPL 2021.10-rc1-00372-gac804143cf-dirty (Sep 06 2021 - 16:32:50) > Channel 0: LPDDR4, 50MHz > BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB > Channel 1: LPDDR4, 50MHz > BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB > 256B stride > lpddr4_set_rate: change freq to 400000000 mhz 0, 1 > lpddr4_set_rate: change freq to 800000000 mhz 1, 0 > Trying to boot from BOOTROM > Returning to boot ROM... > > U-Boot SPL 2021.10-rc1-00372-gac804143cf-dirty (Sep 06 2021 - 16:32:50 -0700) > Trying to boot from SPI > Trying to boot from MMC2 > Card did not respond to voltage select! : -110 > spl: mmc init failed with error: -95 > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### >
Hi Tomasz, I'm hitting the same issue with a custom 3399 based board, did you ever get to the bottom of it? Regards, -- Jack Mitchell, Consultant https://www.tuxable.co.uk