Hi Frieder,
On 30.09.21 15:16, Frieder Schrempf wrote:
Hi Stefano,
On 29.09.21 16:42, Frieder Schrempf wrote:
From: Frieder Schrempf <frieder.schre...@kontron.de>
This a patchset to upstream the support for the SL i.MX6UL, SL i.MX6ULL and
SL i.MX8MM families of SoMs and matching evaluation boards by Kontron
Electronics.
The first patch adds the i.MX6UL/ULL hardware and the second patch the i.MX8MM
hardware.
Changes in v3:
side note: ^ this should be v6 not v3.
* Drop doc preparation patch as Michael picked it up in his series
* Fixes and support for standard distro support for SL/BL i.MX8MM by Heiko
(thanks!)
some weeks ago you picked up a previous version of this set in your
tree, but it didn't get merged. Meanwhile there have been additional
iterations and this v6 is now the latest. Can you pick this up for merging?
I get some warnings building the SL i.MX6UL (because something was moved
into Kconfig). I fixed myself with the following small changes:
diff --git a/configs/kontron-sl-mx6ul_defconfig
b/configs/kontron-sl-mx6ul_defconfig
index 23d1df7fa9..28b5d0d671 100644
--- a/configs/kontron-sl-mx6ul_defconfig
+++ b/configs/kontron-sl-mx6ul_defconfig
@@ -12,6 +12,7 @@ CONFIG_ENV_OFFSET=0xF0000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_MX6UL=y
CONFIG_TARGET_KONTRON_MX6UL=y
+CONFIG_SYS_MALLOC_LEN=0x4000000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx6ul-kontron-n631x-s"
CONFIG_SPL_TEXT_BASE=0x00908000
@@ -26,7 +27,7 @@ CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_IMX_CONFIG="arch/arm/mach-imx/spl_sd.cfg"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_TYPES=y
CONFIG_BOARD_EARLY_INIT_F=y
diff --git a/include/configs/kontron-sl-mx6ul.h
b/include/configs/kontron-sl-mx6ul.h
index f2774d5e61..65aa250894 100644
--- a/include/configs/kontron-sl-mx6ul.h
+++ b/include/configs/kontron-sl-mx6ul.h
@@ -22,7 +22,6 @@
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-#define CONFIG_SYS_MALLOC_LEN SZ_64M
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_INIT_SP_OFFSET \
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
