On Fri, 5 Nov 2010 10:21:53 +0100 Andre Schwarz <andre.schw...@matrix-vision.de> wrote:
> Scott, > > looks like I made a mistake on current MPC8377 NAND wiring. > > Nand-Flash "write enable" is wired to LFWE1 ... I connected each WE to > its corresponding CS, i.e. : > > - CS0/WE0 -> Nor Flash > - CS1/WE1 -> Nand Flash > - CS2/WE2 -> MRAM > > Am I assuming right that FCM can only use WE0 ? I think so. It looks like the other lines were meant to be byte selects for NOR/UPM, not anything to do with the chip select. > Do you see any issue with connecting all devices to WE0 since they have > distinct chip selects ? I guess not, especially if that's the only way the FCM works. But to be sure, maybe ask official Freescale support channels, and/or someone who's more familiar with the hardware side of this stuff. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot