Signed-off-by: Shaohui Xie <b21...@freescale.com> --- doc/README.espi-boot-p4080ds | 82 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 82 insertions(+), 0 deletions(-) create mode 100644 doc/README.espi-boot-p4080ds
diff --git a/doc/README.espi-boot-p4080ds b/doc/README.espi-boot-p4080ds new file mode 100644 index 0000000..50447c1 --- /dev/null +++ b/doc/README.espi-boot-p4080ds @@ -0,0 +1,82 @@ +Overview: +========= +The P4080 integrates a pre-boot-loader(PBL) which performs configuration +registers read and write to initialize external memory devices such as I2c, +eLBC FCM(NAND flash), eSDHC, or SPI interface, loads RCW and/or pre-boot +initialization commands from those devices before the local cores are permitted +to boot. + +Boot from SPI: +============== + +The P4080 is capable of booting from SPI. The bootup process can be divided into +two stages: the first stage will load RCW and write configuration registers to +initialize SPI interface, and configure CPC1 as 1M SRAM, and loads U-boot image +to CPC1. The second stage will configure all the hardware and boot up to U-Boot +command line. + +The PBL image contains three parts, the first is RCW, the second is PBI commands +performs configuration registers write, the third is the 512KB u-boot image. The +PBL image is produced by tool pbl_image_tool.html. + +Build and boot steps +-------------------- + +1. Producing RCW +Copy RCW of u-boot dump and paste it to tab "Tools" of the tool and choose +"RCW[0:511] U-Boot CCSR Dump" and then click button "Decode PBL", switch to tab +"Boot" and change PBI_SRC to "0b0101 - SPI 24b Addressing", change BOOT_LOC to +"0b10000 - Memory Complex 1". + +2. Producing ACS File + make P4080DS_PBLSPI_config + make CROSS_COMPILE=powerpc-none-linux-gnuspe- all + xxd u-boot.bin > u-boot.xxd + +3. Producing PBI commands +Switch to tab "PBI" and paste commands below into text field, then choose +"ACS File (XXD Object Dump)", change Offset to "f80000", and click "Browse" to +select the u-boot.xxd file produced in step 2, and click "Add PBI Data", after +it finished, paste "09138000 00000000" and "091380c0 00000000" at the end. + +Below are Commands pasted before click "Add PBI Data". + + PBI DATA | Description + ----------------------------------------- + | 09010000 00200400 | CPCFI & | + | 09138000 00000000 | CPCLFC | + | 091380c0 00000100 | | + ----------------------------------------- + | 09010100 00000000 | Configure | + | 09010104 fff0000b | CPC1 as | + | 09010f00 08000000 | 1M SRAM | + | 09010000 80000000 | | + ----------------------------------------- + | 09000d00 00000000 | Configure | + | 09000d04 fff00000 | LAW of | + | 09000d08 81000013 | CPC1 | + ----------------------------------------- + | 09000010 00000000 | Configure | + | 09000014 ff000000 | Alternate | + | 09000018 81000000 | | + ----------------------------------------- + | 09110000 80000403 | Initialize | + | 09110020 2d170008 | SPI interface | + | 09110024 00100008 | | + | 09110028 00100008 | | + | 0911002c 00100008 | | + ----------------------------------------- + | 09138000 00000000 | Flush command | + | 091380c0 00000000 | | + ----------------------------------------- + +4. Producing PBL image + 1. Switch to tab "Tools" and click "Encode PBL", after it finished copy +the encoded content to file and save as x.xxd. + 2. xxd -r x.xxd > pbl_u-boot.bin + +5. Put image to SPI flash + Put the pbl_u-boot.bin to SPI flash from offset 0. + +6. Change dip-switch + Change SW1[2] = off, then power on. -- 1.6.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
