On 23.10.21 13:14, Heinrich Schuchardt wrote:
Support for PPC4XX processors has been removed. So we should not mention it
in the documentation.
Signed-off-by: Heinrich Schuchardt <heinrich.schucha...@canonical.com>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
doc/README.bedbug | 22 ----------------------
1 file changed, 22 deletions(-)
diff --git a/doc/README.bedbug b/doc/README.bedbug
index 35e9d2706a..1a2acd0f14 100644
--- a/doc/README.bedbug
+++ b/doc/README.bedbug
@@ -2,8 +2,6 @@ BEDBUG Support for U-Boot
--------------------------
These changes implement the bedbug (emBEDded deBUGger) debugger in U-Boot.
-A specific implementation is made for the AMCC 405 processor but other flavors
-can be easily implemented.
#####################
### Modifications ###
@@ -12,25 +10,9 @@ can be easily implemented.
./common/Makefile
Included cmd_bedbug.c and bedbug.c in the Makefile.
-./common/command.c
- Added bedbug commands to command table.
-
./common/board.c
Added call to initialize debugger on startup.
-./arch/powerpc/cpu/ppc4xx/Makefile
- Added bedbug_405.c to the Makefile.
-
-./arch/powerpc/cpu/ppc4xx/start.S
- Added code to handle the debug exception (0x2000) on the 405.
- Also added code to handle critical exceptions since the debug
- is treated as critical on the 405.
-
-./arch/powerpc/cpu/ppc4xx/traps.c
- Added more detailed output for the program exception to tell
- if it is an illegal instruction, privileged instruction or
- a trap. Also added debug trap handler.
-
./include/ppc_asm.tmpl
Added code to handle critical exceptions
@@ -51,10 +33,6 @@ can be easily implemented.
hardware breakpoints and stepping through code. These
routines are common to all PowerPC processors.
-./arch/powerpc/cpu/ppc4xx/bedbug_405.c
- AMCC PPC405 specific debugger routines.
-
-
Bedbug support for the MPC860
-----------------------------
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
