On 22.10.21 16:22, Pali Rohár wrote:
Now that PCI Bridge is working, U-Boot's CONFIG_PCI_PNP code automatically
enables memory access and bus mastering when it is needed. So do not
prematurely enable memory access and bus mastering.
Signed-off-by: Pali Rohár <p...@kernel.org>
Reviewed-by: Marek Behún <marek.be...@nic.cz>
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
drivers/pci/pci_mvebu.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c
index 40b8a57bbe1e..e43fa12d3819 100644
--- a/drivers/pci/pci_mvebu.c
+++ b/drivers/pci/pci_mvebu.c
@@ -451,14 +451,6 @@ static int mvebu_pcie_probe(struct udevice *dev)
/* Setup windows and configure host bridge */
mvebu_pcie_setup_wins(pcie);
- /* Master + slave enable. */
- reg = readl(pcie->base + PCIE_CMD_OFF);
- reg |= PCI_COMMAND_MEMORY;
- reg |= PCI_COMMAND_IO;
- reg |= PCI_COMMAND_MASTER;
- reg |= BIT(10); /* disable interrupts */
- writel(reg, pcie->base + PCIE_CMD_OFF);
-
/* PCI memory space */
pci_set_region(hose->regions + 0, pcie->mem.start,
pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM);
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
