On 08.11.21 18:12, Marek Behún wrote:
From: Pali Rohár <p...@kernel.org>
xmodem block size is 128 bytes, therefore it is possible to transfer only
images with size multiple of 128 bytes. kwboot automatically pads image
with zero bytes at the end to align it to 128 bytes boundary.
Do this padding when generating image to allow uploading with other xmodem
tools or older kwboot versions.
Signed-off-by: Pali Rohár <p...@kernel.org>
Signed-off-by: Marek Behún <marek.be...@nic.cz>
Minor comment below. Other than this:
Reviewed-by: Stefan Roese <s...@denx.de>
Thanks,
Stefan
---
tools/kwbimage.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tools/kwbimage.c b/tools/kwbimage.c
index 864625d788..b939b4cb49 100644
--- a/tools/kwbimage.c
+++ b/tools/kwbimage.c
@@ -1847,6 +1847,7 @@ static int kwbimage_generate(struct image_tool_params
*params,
* The resulting image needs to be 4-byte aligned. At least
* the Marvell hdrparser tool complains if its unaligned.
* After the image data is stored 4-byte checksum.
+ * Final UART image must be aligned to 128 bytes.
* Final SPI and NAND images must be aligned to 256 bytes.
* Final SATA and SDIO images must be aligned to 512 bytes.
*/
@@ -1854,6 +1855,8 @@ static int kwbimage_generate(struct image_tool_params
*params,
return 4 + (256 - (alloc_len + s.st_size + 4) % 256) % 256;
else if (bootfrom == IBR_HDR_SATA_ID || bootfrom == IBR_HDR_SDIO_ID)
return 4 + (512 - (alloc_len + s.st_size + 4) % 512) % 512;
+ else if (bootfrom == IBR_HDR_UART_ID)
+ return 4 + (128 - (alloc_len + s.st_size + 4) % 128) % 128;
else
return 4 + (4 - s.st_size % 4) % 4;
The lines above are pretty similar - perhaps some function / macro could
be used to simplify these lines?
Thanks,
Stefan
