Hi Tom, On Mon, Nov 8, 2021 at 9:23 PM Tom Rini <tr...@konsulko.com> wrote: > > On Tue, Nov 02, 2021 at 07:35:50PM +0530, Sinthu Raja wrote: > > > From: Sinthu Raja <sinthu.r...@ti.com> > > > > Enable support for selecting DTB from FIT within SPL based on the > > board name read from EEPROM. This will help to use single defconfig > > for both EVM and SK. > > > > Also print FDT model name and board name read from EEPROM on SPL debug > > console. This is useful to verify that right dtb is loaded in each boot > > stage. > > > > Signed-off-by: Sinthu Raja <sinthu.r...@ti.com> > > --- > > > > No changes in V2. > > > > arch/arm/mach-k3/j721e_init.c | 62 +++++++++++++++++++++++++++++++++++ > > 1 file changed, 62 insertions(+) > > The EEPROM scheme is not K3-generic, but rather TI reference platform > specific, so this needs to be abstracted to exist and be called from > under board/ti/j721e/.. thanks. > I guess the commit description is a little misleading. It just calls the board_detect function which is existed under the board/ti/j721e. Printing of board info is not required here which can be removed.
Regards, Sinthu Raja. > -- > Tom -- With Regards Sinthu Raja