Wolfgang, > Dear Andre Schwarz, > > In message<4ce14e3e.7060...@matrix-vision.de> you wrote: > >> >>> This doesn't seem quite right, the MPC837x has USB controllers. >>> >> yes, it has - and it is working fine. >> But USB register range 0x00-0xff is reserved and hangs the CPU. >> >> With this patch USB is working fine on at least MPC8377. >> > Then the commit message should make this clear. At the moment it is > pretty much misleading. >
I didn't add this #ifdef but extended it to not only match 834x but also 837x. All I see is that the ifdef'ed code accesses registers which are explicitely reserved on MPC834x and at least MPC837x. What would be an appropriate commit message from your point of view ? Regards, André MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler Registergericht: Amtsgericht Stuttgart, HRB 271090 Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
