From: qianfan Zhao <qianfangui...@163.com> CHUNK_TYPE_RAW buffer is not aligned, and flash sparse images by fastboot will report "Misaligned operation" if DCACHE is enabled.
Flashing Sparse Image CACHE: Misaligned operation at range [84000028, 84001028] CACHE: Misaligned operation at range [84001034, 84002034] CACHE: Misaligned operation at range [8401104c, 8401304c] Fix it Signed-off-by: qianfan Zhao <qianfangui...@163.com> --- lib/image-sparse.c | 54 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 46 insertions(+), 8 deletions(-) diff --git a/lib/image-sparse.c b/lib/image-sparse.c index d80fdbbf58..1143c88a79 100644 --- a/lib/image-sparse.c +++ b/lib/image-sparse.c @@ -49,6 +49,48 @@ static void default_log(const char *ignored, char *response) {} +static lbaint_t write_sparse_chunk_raw(struct sparse_storage *info, + lbaint_t blk, lbaint_t blkcnt, + void *data, + char *response) +{ + lbaint_t n, write_blks, blks = 0, aligned_buf_blks = 100; + uint32_t *aligned_buf = NULL; + + if (CONFIG_IS_ENABLED(SYS_DCACHE_OFF)) + return info->write(info, blk, blkcnt, data); + + aligned_buf = memalign(ARCH_DMA_MINALIGN, info->blksz * aligned_buf_blks); + if (!aligned_buf) { + info->mssg("Malloc failed for: CHUNK_TYPE_RAW", response); + return -ENOMEM; + } + + while (blkcnt > 0) { + n = min(aligned_buf_blks, blkcnt); + memcpy(aligned_buf, data, n * info->blksz); + + /* write_blks might be > n due to NAND bad-blocks */ + write_blks = info->write(info, blk + blks, n, aligned_buf); + if (write_blks < 0 || write_blks < n) { + printf("%s: %s" LBAFU " [" LBAFU "]\n", + __func__, "Write failed, block #", + blk + blks, n); + info->mssg("flash write failure", response); + free(aligned_buf); + + return min(write_blks, (lbaint_t)-1); + } + + blks += write_blks; + data += n * info->blksz; + blkcnt -= n; + } + + free(aligned_buf); + return blks; +} + int write_sparse_image(struct sparse_storage *info, const char *part_name, void *data, char *response) { @@ -152,15 +194,11 @@ int write_sparse_image(struct sparse_storage *info, return -1; } - blks = info->write(info, blk, blkcnt, data); - /* blks might be > blkcnt (eg. NAND bad-blocks) */ - if (blks < blkcnt) { - printf("%s: %s" LBAFU " [" LBAFU "]\n", - __func__, "Write failed, block #", - blk, blks); - info->mssg("flash write failure", response); + blks = write_sparse_chunk_raw(info, blk, blkcnt, + data, response); + if (blks < 0) return -1; - } + blk += blks; bytes_written += ((u64)blkcnt) * info->blksz; total_blocks += chunk_header->chunk_sz; -- 2.17.1