[PATCH u-boot-next 10/12] x86: pci: Use PCI_CONF1_ADDRESS() macro

[Pali Rohár]

x86 platform uses standard format of Config Address for PCI Configuration
Mechanism #1. So use new U-Boot macro PCI_CONF1_ADDRESS().

Signed-off-by: Pali Rohár <p...@kernel.org>
---
 arch/x86/cpu/pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/cpu/pci.c b/arch/x86/cpu/pci.c
index d4f9290ca73b..8a992ed82339 100644
--- a/arch/x86/cpu/pci.c
+++ b/arch/x86/cpu/pci.c
@@ -20,7 +20,7 @@
 int pci_x86_read_config(pci_dev_t bdf, uint offset, ulong *valuep,
                        enum pci_size_t size)
 {
-       outl(bdf | (offset & 0xfc) | PCI_CFG_EN, PCI_REG_ADDR);
+       outl(PCI_CONF1_ADDRESS(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), 
offset), PCI_REG_ADDR);
        switch (size) {
        case PCI_SIZE_8:
                *valuep = inb(PCI_REG_DATA + (offset & 3));
@@ -39,7 +39,7 @@ int pci_x86_read_config(pci_dev_t bdf, uint offset, ulong 
*valuep,
 int pci_x86_write_config(pci_dev_t bdf, uint offset, ulong value,
                         enum pci_size_t size)
 {
-       outl(bdf | (offset & 0xfc) | PCI_CFG_EN, PCI_REG_ADDR);
+       outl(PCI_CONF1_ADDRESS(PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf), 
offset), PCI_REG_ADDR);
        switch (size) {
        case PCI_SIZE_8:
                outb(value, PCI_REG_DATA + (offset & 3));
-- 
2.20.1