On 12/2/21 20:56, Ovidiu Panait wrote:
The xilinx board_fdt_blob_setup() implementation makes use of XILINX_OF_BOARD_DTB_ADDR, but no default value is currently defined for microblaze. Add one so that microblaze could also work with CONFIG_OF_SEPARATE. Signed-off-by: Ovidiu Panait <[email protected]> --- board/xilinx/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig index 64507b5d84..1788066173 100644 --- a/board/xilinx/Kconfig +++ b/board/xilinx/Kconfig @@ -43,6 +43,7 @@ endif config XILINX_OF_BOARD_DTB_ADDR hex "Default DTB pickup address" default 0x1000 if ARCH_VERSAL + default 0x8000 if MICROBLAZE default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP depends on OF_BOARD || OF_SEPARATE help
Applied. M -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
