This converts the following to Kconfig:
CONFIG_SYS_MEMTEST_START
CONFIG_SYS_MEMTEST_END
This is removing unused defines and correcting the default value to be
0x0 as we are a hex symbol.
Signed-off-by: Tom Rini <tr...@konsulko.com>
---
cmd/Kconfig | 2 +-
include/configs/imx8mm_beacon.h | 3 ---
include/configs/imx8mm_icore_mx8mm.h | 7 -------
include/configs/imx8mq_phanbell.h | 4 ----
include/configs/kontron_sl28.h | 4 ----
include/configs/pico-imx8mq.h | 4 ----
include/configs/synquacer.h | 3 ---
7 files changed, 1 insertion(+), 26 deletions(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index fd8f0227c891..7747ab50a042 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -741,7 +741,7 @@ endif
config SYS_MEMTEST_START
hex "default start address for mtest"
- default 0
+ default 0x0
help
This is the default start address for mtest for simple read/write
test. If no arguments are given to mtest, default address is used
diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h
index 1040a6897b79..77f062474dd6 100644
--- a/include/configs/imx8mm_beacon.h
+++ b/include/configs/imx8mm_beacon.h
@@ -91,9 +91,6 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >>
1))
-
#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
/* Monitor Command Prompt */
diff --git a/include/configs/imx8mm_icore_mx8mm.h
b/include/configs/imx8mm_icore_mx8mm.h
index fe997f9d1851..d75fcf747e41 100644
--- a/include/configs/imx8mm_icore_mx8mm.h
+++ b/include/configs/imx8mm_icore_mx8mm.h
@@ -28,9 +28,6 @@
# define CONFIG_SPL_ABORT_ON_RAW_IMAGE
#endif /* CONFIG_SPL_BUILD */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >>
1))
-
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 2) \
@@ -69,10 +66,6 @@
#define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
#define CONFIG_SYS_BOOTM_LEN SZ_256M
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END \
- (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
-
/* UART */
#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
diff --git a/include/configs/imx8mq_phanbell.h
b/include/configs/imx8mq_phanbell.h
index 7afdfd6efe88..1668ca8acf3e 100644
--- a/include/configs/imx8mq_phanbell.h
+++ b/include/configs/imx8mq_phanbell.h
@@ -116,10 +116,6 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
- (PHYS_SDRAM_SIZE >> 1))
-
#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
/* Monitor Command Prompt */
diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h
index 4152851ba414..84dd818aa9c8 100644
--- a/include/configs/kontron_sl28.h
+++ b/include/configs/kontron_sl28.h
@@ -30,10 +30,6 @@
/* early stack pointer */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE +
0xeff0)
-/* memtest command */
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END 0x9fffffff
-
/* SMP */
#define CPU_RELEASE_ADDR secondary_boot_addr
diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index 716f1327c321..2293a2919e28 100644
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -95,10 +95,6 @@
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2 GiB DDR */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
- (PHYS_SDRAM_SIZE >> 1))
-
#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
/* Monitor Command Prompt */
diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h
index 3d099b4f11f7..2347ec2fe0cf 100644
--- a/include/configs/synquacer.h
+++ b/include/configs/synquacer.h
@@ -41,9 +41,6 @@
#define CONFIG_SYS_FLASH_BASE (0x08000000)
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (512 * 1024))
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE +
PHYS_SDRAM_SIZE)
-
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_MAXARGS 128
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE +
sizeof(CONFIG_SYS_PROMPT) + 16)
--
2.25.1
