Dear DUNDA Matthias, In message <13246_1290092163_4ce53e83_13246_17888_1_3cf34b583782c147807e09365f884da42f058fe...@thsncoa06mxs02p.one-06.grp> you wrote: > > > > What's the intended/desired function of ethact, and how should it be > > initialized? Even using CONFIG_ETHPRIME has no effect. > > > > These variabes are documented in the README. > > Yes, I read that! That's why I used CONFIG_ETHPRIME in my board header file > to do the trick - maybe my env was corrupted, or something - I don't know, > why it didn't show up by default... I had to setenv it by hand.
CONFIG_ETHPRIME affects only your _default_ envrionment, i. e. what gets used when the normal environment is not available for some reason (like corrupted). As long as it remains valid, installing a new U-Boot image with additional settings in the _default_ environment will not change anything as the default environment never gets referenced. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Star Trek Lives! _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot