Hi there, This may not be the ideal place to post this question, but I thought someone might know this.
I have custom board using OMAP3 and I have a problem. We have more than one I2C slave connected on I2C1 & u-boot was not displaying the slave addresses correctly. I fixed some issues in u-boot and am finally able to see the u-boot displaying the I2C devices correctly. But after this Kernel stopped to boot. It just gives the message: Starting kernel ... Uncompressing Linux........................................................................................................................................................... done, booting the kernel. and stops. I tried to find out the possible reason, but no use so far (about 2 days). Currently my MLO (x-loader), u-boot.bin, & the kernel uImage reside on the SD Card . BTW, I found a curious comment in the kernel code: /* First I2C bus is not muxable */ Can this be a problem for the board not booting? As I had been playing with I2C only, I had to dig mainly on the I2C direction. any other pointers will be helpful Thanks & regards Murali _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot