> -----Original Message----- > From: Markus Koch <mar...@notsyncing.net> > Sent: Friday, January 7, 2022 19:49 > To: Camelia Alexandra Groza (OSS) <camelia.gr...@oss.nxp.com>; > joe.hershber...@ni.com; rfried....@gmail.com; Ioana Ciornei > <ioana.cior...@nxp.com> > Cc: Madalin Bucur (OSS) <madalin.bu...@oss.nxp.com>; u- > b...@lists.denx.de > Subject: Re: [PATCH v2] net: fsl_mdio: Fix busy flag polling register > > On 1/7/22 17:23, Camelia Alexandra Groza (OSS) wrote: > >> -----Original Message----- > >> From: U-Boot <u-boot-boun...@lists.denx.de> On Behalf Of Markus > Koch > >> Sent: Tuesday, January 4, 2022 17:42 > >> To: Ioana Ciornei <ioana.cior...@nxp.com>; joe.hershber...@ni.com; > >> rfried....@gmail.com > >> Cc: Madalin Bucur (OSS) <madalin.bu...@oss.nxp.com>; Camelia > Alexandra > >> Groza <camelia.gr...@nxp.com>; u-boot@lists.denx.de; Markus Koch > >> <mar...@notsyncing.net> > >> Subject: [PATCH v2] net: fsl_mdio: Fix busy flag polling register > >> > >> NXP's mEMAC reference manual, Chapter 6.5.5 "MDIO Ethernet > >> Management > >> Interface usage", specifies to poll the BSY (0) bit in the CFG/STAT > >> register to wait until a transaction has finished, not bit 31 in the > >> data register. > >> > >> In the Linux kernel, this has already been fixed in commit 26eee0210ad7 > >> ("net/fsl: fix a bug in xgmac_mdio"). > >> > >> Signed-off-by: Markus Koch <mar...@notsyncing.net> > > > > I am ok with the change for the mEMAC driver but MDIO_DATA_BSY is still > > used by the fsl_ls_mdio driver. The MDIO driver suffers from the same > issue. > > > > Please send a v3 and either patch both drivers or don't remove the define. > > Also, if removing the define, please mention it explicitly in the patch > > description. > > I'll change the other driver as well. > > There's also the fm/tgec_phy driver that uses the same construct, but it has > its own define for MDIO_DATA_BSY. Should I also change that? I think it > corresponds to Linux' xgmac_mdio.c which also uses the STAT_BSY register, > but > I don't have a datasheet to verify the register definition.
The TGEC controller has BUSY bits mirroring each other in both the MDIO_DATA and MDIO_CFG_STAT registers. The tgec_phy driver doesn't need changing. Regards, Camelia > Thanks, > Markus > > > Thanks, > > Camelia > > > >> --- > >> > >> Changed to use the mdio_stat register. Thanks, Ioana! > >> > >> drivers/net/fm/memac_phy.c | 2 +- > >> include/fsl_memac.h | 1 - > >> 2 files changed, 1 insertion(+), 2 deletions(-) > >> > >> diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c > >> index 72b500a6d1..3ddae97e09 100644 > >> --- a/drivers/net/fm/memac_phy.c > >> +++ b/drivers/net/fm/memac_phy.c > >> @@ -64,7 +64,7 @@ static int memac_wait_until_done(struct > >> memac_mdio_controller *regs) > >> { > >> unsigned int timeout = MAX_NUM_RETRIES; > >> > >> - while ((memac_in_32(®s->mdio_data) & MDIO_DATA_BSY) && > >> timeout--) > >> + while ((memac_in_32(®s->mdio_stat) & MDIO_STAT_BSY) && > >> timeout--) > >> ; > >> > >> if (!timeout) { > >> diff --git a/include/fsl_memac.h b/include/fsl_memac.h > >> index d067f1511c..6ac1e558b9 100644 > >> --- a/include/fsl_memac.h > >> +++ b/include/fsl_memac.h > >> @@ -254,7 +254,6 @@ struct memac_mdio_controller { > >> #define MDIO_CTL_READ (1 << 15) > >> > >> #define MDIO_DATA(x) (x & 0xffff) > >> -#define MDIO_DATA_BSY (1 << 31) > >> > >> struct fsl_enet_mac; > >> > >> -- > >> 2.34.1 > >